Construction Painter Course

Lesson 1 • Tools and Equipment Identification

Introduces hand tools, power tools, and application equipment used daily. Correct identification prevents misuse and supports efficient workflow.

Lesson 2 • The Painting Trade Overview

Defines the construction painting profession and its place in the building industry. Establishes context for all subsequent technical and safety content.

Lesson 3 • Workplace Safety Fundamentals

Covers core occupational health and safety principles specific to painting sites. Compliance with safety standards protects workers and reduces liability.

Lesson 1 • Understanding Substrate Types

Identifies common substrates including drywall, concrete, wood, and metal. Substrate knowledge drives correct prep method and primer selection.

Lesson 2 • Priming Strategies for Adhesion

Explains primer chemistry, selection criteria, and application methods by substrate. Correct priming seals surfaces and maximises topcoat bond strength.

Lesson 3 • Repairing Defects Before Painting

Teaches filling, patching, and sanding to achieve a smooth, defect-free surface. Repairs must be fully cured and feathered before any coating is applied.

Lesson 4 • Cleaning and Degreasing Surfaces

Covers mechanical and chemical cleaning methods to remove contaminants. Clean surfaces are prerequisite to adhesion and uniform coating performance.

Lesson 1 • Water-Based vs. Solvent-Based Coatings

Compares latex, acrylic, alkyd, and epoxy systems across key performance metrics. Selection criteria include environment, substrate, and regulatory requirements.

Lesson 2 • Paint Chemistry Basics

Explains binders, pigments, solvents, and additives that form a coating. Understanding chemistry enables informed product selection and troubleshooting.

Lesson 3 • Material Storage and Handling

Establishes safe storage, shelf-life management, and disposal of paint products. Proper handling prevents waste, contamination, and safety incidents on site.

Lesson 4 • Specialty Coatings and Primers

Covers fire-retardant, anti-corrosion, elastomeric, and texture coatings. Specialty products address performance demands beyond standard decorative painting.

Lesson 1 • Rolling Technique and Pattern

Teaches systematic rolling patterns that eliminate lap marks and ensure even coverage. Consistent technique produces a uniform finish across large surfaces.

Lesson 2 • Cutting In and Edging Techniques

Develops precision brush control for edges, corners, and trim work. Clean cut lines eliminate the need for excessive masking and rework.

Lesson 3 • Roller Selection and Setup

Covers nap thickness, core material, and frame selection for various surfaces. Correct roller setup ensures uniform film thickness and minimal splatter.

Lesson 4 • Brush Selection and Care

Matches brush type, bristle material, and size to specific tasks and coatings. Proper care extends brush life and maintains application quality.

Lesson 1 • Spray Technique and Gun Handling

Teaches correct distance, speed, overlap, and trigger control for uniform coverage. Consistent gun handling is the foundation of defect-free spray application.

Lesson 2 • Equipment Setup and Calibration

Covers tip selection, pressure settings, and fluid adjustments for consistent spray patterns. Proper calibration prevents runs, dry spray, and uneven film build.

Lesson 3 • Equipment Cleaning and Maintenance

Details flushing, disassembly, and storage procedures for spray equipment. Regular maintenance prevents blockages, corrosion, and costly equipment failure.

Lesson 4 • Spray System Types and Selection

Compares airless, HVLP, and air-assisted airless systems by output, transfer efficiency, and use case. Correct system selection reduces material waste and labour time.

Lesson 1 • Interior Project Planning

Covers site assessment, material takeoff, and scheduling for interior jobs. Thorough planning prevents delays, material shortages, and sequencing errors.

Lesson 2 • Painting Doors, Windows, and Trim

Teaches detailed brush technique for joinery, mouldings, and architectural trim. Precision on trim work defines the overall quality perception of an interior finish.

Lesson 3 • Interior Quality Inspection and Touch-Up

Develops systematic inspection skills to identify and correct defects before handover. Quality control at this stage prevents costly callbacks and protects reputation.

Lesson 4 • Ceiling and Wall Painting Sequence

Establishes the correct order for painting ceilings, walls, and trim to avoid rework. Sequence management is critical to achieving clean lines and efficient production.

Lesson 1 • Exterior Quality and Durability Review

Establishes inspection criteria for film integrity, adhesion, and coverage on exterior work. Final review confirms the system will perform through seasonal weather cycles.

Lesson 2 • Exterior Site Assessment

Covers inspection of existing coatings, substrate condition, and environmental factors. Accurate assessment drives correct prep scope and product specification.

Lesson 3 • Exterior Coating Selection

Matches coating systems to substrate type, climate exposure, and finish requirements. Correct product selection is the primary driver of exterior coating longevity.

Lesson 4 • Application in Variable Conditions

Teaches scheduling and technique adjustments for temperature, humidity, and wind. Environmental compliance windows must be respected to ensure proper film formation.

Lesson 1 • Diagnosing Coating Failures

Identifies causes of peeling, blistering, cracking, and chalking in applied coatings. Root-cause diagnosis prevents recurrence and guides correct remediation strategy.

Lesson 2 • Remediation and Recoating Strategies

Covers removal, stabilisation, and recoating procedures for failed coating systems. Correct remediation restores substrate integrity and ensures new coating performance.

Lesson 3 • High-Build and Multi-Layer Systems

Teaches application of high-build primers, intermediate coats, and topcoats as a system. Multi-layer systems are required for industrial, protective, and high-wear environments.

Lesson 4 • Final Inspection and Handover Standards

Establishes professional handover procedures including documentation and client sign-off. Meeting specification at handover protects against disputes and warranty claims.