Lighting Installation Course

Lesson 1 • Series and Parallel Circuits

Explains how series and parallel configurations behave differently under load. Students calculate voltage drops and current distribution in each topology.

Lesson 2 • Electrical Units and Measurements

Introduces standard units and measurement tools used on lighting job sites. Accurate measurement skills prevent wiring errors and equipment damage.

Lesson 3 • Conductors, Insulators, and Semiconductors

Distinguishes material types and their roles in lighting system components. Understanding material properties guides correct conductor and component selection.

Lesson 1 • Electrical Hazard Recognition

Identifies shock, arc flash, and fire hazards present in lighting installation environments. Hazard recognition is the first step in preventing workplace injuries.

Lesson 2 • Working Safely at Heights

Addresses ladder safety, scaffold use, and fall protection for overhead lighting installation. Height safety rules apply to nearly every commercial and industrial lighting task.

Lesson 3 • Personal Protective Equipment for Electricians

Covers PPE selection, inspection, and use for electrical and elevated work tasks. Correct PPE use reduces injury severity when hazards cannot be fully eliminated.

Lesson 4 • Regulatory Standards and Permit Requirements

Explains the role of electrical codes, inspection authorities, and permit processes in lighting projects. Compliance protects installers, owners, and occupants from legal and safety risks.

Lesson 1 • Fixture and Luminaire Construction

Examines housing, optics, thermal management, and mounting hardware in luminaires. Knowledge of construction aids proper handling and installation.

Lesson 2 • Drivers, Ballasts, and Transformers

Details the power-conversion devices that condition electricity for each lamp type. Correct driver matching prevents premature lamp and driver failure.

Lesson 3 • Control Devices and Accessories

Introduces switches, dimmers, occupancy sensors, and photocells used with lighting systems. Proper accessory selection ensures compatibility and code compliance.

Lesson 1 • Electrical Symbols and Legends

Teaches standard symbols for fixtures, outlets, switches, panels, and conduit on electrical drawings. Symbol recognition allows rapid and accurate interpretation of lighting layouts.

Lesson 2 • Fixture Schedules and Specifications

Explains how to read fixture schedules, cut sheets, and specification sections for product data. Schedules link drawing symbols to exact product and wiring requirements.

Lesson 3 • Blueprint Fundamentals

Introduces drawing scales, title blocks, revision clouds, and sheet organisation. Blueprint literacy is the foundation for all plan-reading tasks in this chapter.

Lesson 4 • Lighting Layout Plans

Focuses on reading reflected ceiling plans and lighting layout sheets for fixture placement. Accurate layout reading prevents misplaced fixtures and rework.

Lesson 1 • Conductor and Cable Types for Lighting

Identifies conductor types, insulation ratings, and cable assemblies approved for lighting circuits. Correct conductor selection ensures safety and code compliance in every installation.

Lesson 2 • Conduit Bending Techniques

Teaches hand bender and mechanical bender use to produce accurate stubs, offsets, and saddles. Precise bends reduce conductor damage and produce professional-quality installations.

Lesson 3 • Conductor Pulling and Termination

Covers fish tape use, conductor lubricant, pulling tension limits, and proper termination methods. Correct pulling and termination techniques prevent insulation damage and connection failures.

Lesson 4 • Conduit Types and Selection

Compares rigid metal, intermediate metal, EMT, PVC, and flexible conduit for lighting applications. Selection depends on environment, exposure, and code requirements.

Lesson 1 • Under-Cabinet and Cove Lighting

Covers LED strip, puck, and linear fixture installation in millwork and architectural coves. Concealed wiring and thermal management are critical for these close-proximity installations.

Lesson 2 • Residential Fixture Installation

Covers ceiling, wall, and recessed fixture installation in residential construction. Proper mounting and earthing ensure safety and long-term fixture performance.

Lesson 3 • Track and Accent Lighting Systems

Explains single-circuit and multi-circuit track installation, head mounting, and aiming. Track systems require careful circuit planning to avoid overloading conductors.

Lesson 4 • Commercial Troffer and Panel Installation

Teaches installation of lay-in troffers, surface-mount panels, and suspended linear fixtures in commercial ceilings. Alignment and support requirements differ significantly from residential work.

Lesson 1 • Parking Lot and Area Lighting

Teaches pole base preparation, anchor bolt alignment, pole erection, and luminaire mounting for site lighting. Proper earthing of metal poles is essential for personnel safety.

Lesson 2 • Outdoor Fixture Mounting and Weatherproofing

Covers wall packs, area lights, and post-top fixtures installed in wet and damp locations. Weatherproof sealing and corrosion-resistant hardware prevent premature failure.

Lesson 3 • Landscape and Low-Voltage Lighting

Explains low-voltage transformer installation, cable burial, and fixture staking for landscape systems. Voltage drop management is critical over long cable runs in landscape lighting.

Lesson 4 • Signage and Decorative Lighting

Covers neon, LED channel letter, and decorative string light installation for commercial signage. Transformer sizing and weatherproof wiring methods are key installation considerations.

Lesson 1 • Maintenance and Preventive Care

Establishes maintenance schedules, cleaning procedures, and lamp replacement protocols for long-term system performance. Preventive maintenance extends equipment life and preserves light output.

Lesson 2 • Lighting Control System Wiring

Covers 0–10V dimming, DALI, and relay-based control wiring for commercial lighting systems. Correct low-voltage signal wiring prevents interference and control malfunctions.

Lesson 3 • Networked and Wireless Control Systems

Introduces wireless mesh, power-line carrier, and IP-based lighting control architectures. Installers must understand network topology to position devices and avoid coverage gaps.

Lesson 4 • Troubleshooting Lighting Faults

Develops a systematic diagnostic approach for common lighting failures including flickering, no-light, and control errors. Efficient troubleshooting minimises downtime and callback costs.