Structured Cabling Installer Course

Lesson 1 • Cable Types and Media Fundamentals

Differentiates copper, fibre optic, and coaxial media by construction and application. Connects media selection to performance and environmental requirements.

Lesson 2 • Safety and Personal Protective Equipment

Establishes mandatory safety practices for cabling work environments. Students apply hazard identification and PPE selection before any hands-on activity.

Lesson 3 • Industry Standards and Regulatory Frameworks

Covers the major cabling standards bodies and their functional requirements. Establishes why compliance drives every installation decision in the field.

Lesson 1 • Connectors, Jacks, and Patch Panels

Introduces the hardware components used to terminate and organise cables. Students distinguish connector types by category rating and application.

Lesson 2 • Cable Management Hardware

Covers trays, conduit, raceways, and fasteners used to route and protect cables. Proper management supports performance, airflow, and future maintenance.

Lesson 3 • Hand Tools for Cabling Work

Identifies and demonstrates proper use of essential hand tools. Correct tool selection prevents cable damage and ensures termination quality.

Lesson 1 • Interpreting Architectural and Electrical Drawings

Teaches symbol recognition, scale reading, and drawing conventions used in construction documents. Accurate plan reading prevents costly field errors.

Lesson 2 • Pathway and Space Planning

Addresses conduit routing, cable tray sizing, and fill ratio calculations. Students design pathways that meet capacity and bend-radius requirements.

Lesson 3 • Material Takeoff and Job Site Preparation

Guides students through quantifying materials from drawings and staging a job site. Accurate takeoffs reduce waste and prevent installation delays.

Lesson 1 • Patch Panel and Cross-Connect Termination

Covers 110-style and modular patch panel termination for horizontal and backbone cables. Students dress, terminate, and label panels to documentation standards.

Lesson 2 • Cable Pulling Methods and Practices

Covers manual and mechanical pulling techniques for horizontal and backbone runs. Students apply tension limits and pulling lubricant guidelines to protect cable integrity.

Lesson 3 • Earthing and Bonding for Copper Systems

Addresses shielded cable earthing, bonding conductors, and telecommunications earthing busbar installation. Proper earthing prevents noise and protects equipment.

Lesson 4 • Terminating Copper at the Work Area

Teaches T568A and T568B wiring schemes and jack termination procedures. Correct termination maintains pair twist to within standard limits.

Lesson 1 • Fibre Splicing Techniques

Introduces mechanical and fusion splicing methods and their performance trade-offs. Students perform splices and evaluate loss against acceptance criteria.

Lesson 2 • Fibre Cable Types and Routing

Differentiates tight-buffered, loose-tube, and armoured fibre constructions by application. Students select and route fibre to meet bend radius and pulling tension limits.

Lesson 3 • Fibre Optic Connector Termination

Covers epoxy, pre-polished, and field-installable connector termination methods. Students cleave, polish, and inspect connectors to achieve acceptable end-face geometry.

Lesson 4 • Fibre Distribution and Enclosure Hardware

Covers fibre distribution units, splice enclosures, and patch panel installation. Students organise fibre with proper slack storage and bend radius protection.

Lesson 1 • Labelling and Documentation Standards

Establishes labelling conventions for ports, cables, panels, and rooms per industry guidelines. Consistent labelling is essential for efficient moves, adds, and changes.

Lesson 2 • Rack and Cabinet Installation

Covers floor-mount and wall-mount rack anchoring, levelling, and earthing. Proper rack installation supports equipment weight and maintains bonding continuity.

Lesson 3 • Horizontal and Vertical Cable Management

Addresses the installation of cable managers, D-rings, and finger ducts within racks. Organised cable management enables airflow, reduces strain, and simplifies moves.

Lesson 1 • Diagnosing and Correcting Test Failures

Provides a systematic fault-finding approach for common copper and fibre failures. Students trace root causes and apply targeted corrections to achieve compliance.

Lesson 2 • Fibre Optic Loss Testing

Teaches OLTS and OTDR methods for verifying fibre link loss and locating faults. Students set reference conditions and compare results to calculated loss budgets.

Lesson 3 • Test Documentation and Reporting

Covers test report generation, file management, and submission to project stakeholders. Accurate records support warranty claims and future troubleshooting.

Lesson 1 • Punch-List Management and Remediation

Teaches how to create, prioritise, and close punch-list items efficiently. Timely remediation protects project schedule and client satisfaction.

Lesson 2 • Project Closeout and Warranty Documentation

Covers the assembly of closeout packages including as-builts, test reports, and warranty registration. Complete documentation protects both installer and client.

Lesson 3 • System Acceptance Testing Walkthrough

Guides students through a client-facing acceptance test and demonstration. Students present test results and explain system performance to non-technical stakeholders.