Dedika is a platform where you learn by doing: whether it's putting together a business proposal, becoming a nail technician, or using a new tool, for example. No matter your goal, the best content on the topic is already out there. But it's often in another language, expensive, scattered around, lacking practice activities, or part of a course that's too long for a busy schedule. That's why Dedika has its own approach: we find this material wherever it is, organise what makes sense for your goal, review it with support from experts who are available to answer questions, and create practical exercises so you learn by doing. You're the most important part of your journey and no one knows it better than you: choose the content and course length, whether you'll learn online or offline, and in whichever format suits you—video, text, audio, or summary. Your way, only with what makes sense for you. Here, every moment you dedicate is worth more and you get to what matters faster.

Our courses include a summary at the end of each chapter, which you can download as a PDF and print.

More than 2 million students worldwide

Present in more than 180 countries

Certificate valid in your country

Home Page

...

Auto Glass Installer Course

All courses

Transportation, Automotive and Logistics

Automobile Bodywork and Painting

Auto Glass Installer Course

For all levels

Auto Glass Installer Course

Name: Auto Glass Installer Course
Price: 294 AUD

Get the hands-on knowledge and technical skills to work as a professional auto glass installer from day one. This course covers everything from windshield removal and urethane adhesive systems to ADAS calibration and side glass replacement. Whether you're breaking into the trade or sharpening your skills, this is the training that gets you job-ready.

Dedika for businesses

What you'll learn:

This course walks you through every stage of professional auto glass work, starting with glass types, tools, and industry safety standards. You'll learn how to remove windshields using power cut-out tools, wire systems, and cold knives without damaging the vehicle. Urethane adhesive chemistry, primer application, and pinch weld preparation are covered in full detail. You'll also learn how to install windshields, replace side and rear glass, and handle embedded sensors and camera brackets correctly. The course includes ADAS calibration fundamentals, leak detection, chip repair, and mobile installation techniques. Business basics like estimating, inventory, and customer communication round out your training.

How you study in practice Auto Glass Installer Course

How you practise Auto Glass Installer Course

For businesses looking to train their team

With Dedika for businesses, the course includes exercises and examples tailored to your own business and the way your company needs.

Click here

Course content

8 Chapters • 38 LessonsDuration between 4 and 360 hours (you decide)

Chapter 1See details

Auto Glass Industry Foundations

Lesson 1 • Tools and Equipment Identification
Surveys hand tools, power tools, and specialty equipment used in auto glass work. Students match each tool to its specific application before touching a vehicle.
Lesson 2 • Industry Overview and Career Paths
Covers the scope of the auto glass trade, job roles, and employer types. Grounds students in realistic career expectations before technical training begins.
Lesson 3 • Regulatory and Quality Standards
Outlines safety glazing regulations, drive-away time requirements, and quality benchmarks. Students understand compliance obligations that govern every installation.
Lesson 4 • Workplace Safety and PPE
Introduces mandatory personal protective equipment and shop safety protocols. Connects safe habits to injury prevention throughout all hands-on chapters.
Lesson 5 • Auto Glass Types and Terminology
Defines laminated, tempered, and acoustic glass along with industry-standard terminology. Provides the vocabulary students need to read work orders and communicate professionally.

Chapter 2See details

Vehicle Anatomy for Glass Installers

Lesson 1 • Embedded Technology in Glass Openings
Identifies sensors, cameras, antennas, and heating elements integrated into modern glass. Students learn to locate and protect these components before cutting begins.
Lesson 2 • Vehicle-Specific Reference Resources
Introduces service manuals, glass databases, and OEM technical bulletins. Students practice locating vehicle-specific procedures before performing any removal.
Lesson 3 • Trim, Moulding, and Clip Systems
Covers interior and exterior trim components that must be removed before glass work. Proper trim handling prevents breakage and reduces comebacks.
Lesson 4 • Body Structure and Pinch Weld Basics
Explains how vehicle frames, A-pillars, and pinch welds support glass openings. Understanding structure prevents costly damage during removal and installation.

Chapter 3See details

Urethane Adhesive Systems

Lesson 1 • Drive-Away Time Calculations
Teaches how to calculate minimum safe drive-away time based on product and conditions. Students practice real-world scenarios to ensure customer safety compliance.
Lesson 2 • Adhesive Product Lines and Selection
Compares standard, fast-cure, and extended-open-time urethane products. Students match product type to job conditions such as temperature and drive-away requirements.
Lesson 3 • Primers and Surface Preparation Chemicals
Covers glass primers, pinch weld primers, and activators used to ensure adhesion. Correct primer application is the most critical factor in bond strength.
Lesson 4 • Adhesive Storage and Handling
Details shelf life, temperature storage ranges, and cartridge handling procedures. Improper storage is a leading cause of adhesive failure in the field.
Lesson 5 • Urethane Chemistry Fundamentals
Explains moisture-cure polyurethane chemistry and how it creates structural bonds. This foundation prevents misuse of adhesives in subsequent installation chapters.

Chapter 4See details

Windscreen Removal Techniques

Lesson 1 • Glass Removal and Disposal
Covers safe extraction of cut glass using suction cups and team lift procedures. Proper disposal of broken or delaminated glass prevents injury and environmental violations.
Lesson 2 • Cold Knife and Long Knife Methods
Teaches manual cutting techniques using cold knives and long knives on urethane beads. Manual methods remain essential when power tools risk sensor or trim damage.
Lesson 3 • Pre-Removal Inspection and Preparation
Establishes the inspection checklist and vehicle protection steps before any cutting begins. Thorough preparation reduces rework and protects vehicle interiors.
Lesson 4 • Power Cut-Out Tool Operation
Covers pneumatic and electric oscillating cut-out tool setup and safe operation. Power tools increase speed but require precise depth control to avoid damage.
Lesson 5 • Wire Cut-Out System Techniques
Introduces piano wire and stainless wire systems for precision urethane cutting. Wire methods are preferred on vehicles with flush-mount glass and tight tolerances.

Chapter 5See details

Pinch Weld Preparation and Priming

Lesson 1 • Pinch Weld Damage Assessment and Repair
Identifies corrosion, gouges, and deformation that compromise the bonding surface. Students apply repair procedures before priming to restore flange integrity.
Lesson 2 • Primer Application Procedures
Details step-by-step primer application to pinch welds and glass frit bands. Correct application thickness and dry time directly determine bond strength.
Lesson 3 • Surface Cleaning and Contamination Control
Covers solvent wiping, lint-free cloth technique, and contamination sources that degrade adhesion. Clean surfaces are the single most controllable factor in bond quality.
Lesson 4 • Old Urethane Removal Methods
Teaches how to trim existing urethane to the correct height using knives and oscillating tools. Leaving a proper bead stub is essential for adhesion and leak prevention.

Chapter 6See details

Windscreen Installation Procedures

Lesson 1 • Urethane Bead Application
Covers gun setup, nozzle selection, and bead profile requirements for windscreen installation. A consistent, correctly sized bead is the foundation of a leak-free, structural bond.
Lesson 2 • Setting Blocks and Alignment Aids
Explains the use of setting blocks, spacers, and alignment marks to position glass correctly. Proper positioning prevents stress fractures and ensures sensor alignment.
Lesson 3 • Post-Installation Inspection and Cleanup
Details the final inspection checklist, excess urethane removal, and trim reinstallation. A thorough post-install check prevents leaks, rattles, and customer complaints.
Lesson 4 • Sensor and Camera Bracket Installation
Covers reinstallation of rain sensors, camera brackets, and mirror buttons to OEM specifications. Incorrect bracket placement causes ADAS calibration failure.
Lesson 5 • Glass Seating and Pressing Technique
Teaches the controlled seating motion and pressing sequence to embed glass into the bead. Uniform pressure distribution prevents voids and ensures full bead contact.

Chapter 7See details

Side and Rear Glass Replacement

Lesson 1 • Tempered Door Glass Replacement
Covers removal and installation of tempered side glass using mechanical attachment methods. Tempered glass shatters completely, requiring different handling than laminated glass.
Lesson 2 • Rear Window Replacement
Covers full rear window removal and installation including defroster grid reconnection. Rear windows combine adhesive bonding with electrical components requiring careful handling.
Lesson 3 • Specialty Glass and Sunroofs
Introduces panoramic glass, sunroof glass, and vent glass replacement considerations. These applications require manufacturer-specific procedures and additional sealing steps.
Lesson 4 • Fixed Quarter Glass Replacement
Teaches adhesive removal and installation of fixed quarter windows using urethane systems. Quarter glass often has tight tolerances requiring precise bead placement.
Lesson 5 • Door Glass Regulator Systems
Explains manual and power window regulator designs and their relationship to glass replacement. Understanding regulators prevents damage during door panel removal.

Chapter 8See details

ADAS Calibration Fundamentals

Lesson 1 • Dynamic Calibration Procedures
Explains road-speed, lane-marking, and distance requirements for dynamic calibration drives. Students learn to select appropriate routes and verify successful calibration completion.
Lesson 2 • Calibration Equipment and Liability
Reviews scan tools, target systems, and the liability implications of uncalibrated ADAS. Students understand when to perform in-house calibration versus referring to a dealer.
Lesson 3 • ADAS Technology Overview
Surveys camera, radar, and lidar systems mounted in or near the windscreen. Understanding system types helps installers identify calibration requirements before starting a job.
Lesson 4 • Static Calibration Procedures
Covers target placement, scan tool connection, and procedure steps for static ADAS calibration. Precise target positioning is the most critical variable in static calibration accuracy.
Lesson 5 • When Calibration Is Required
Defines the conditions that mandate static or dynamic calibration after glass replacement. Skipping required calibration creates serious liability and safety risks.

Certification

Your valid completion certificate

This course is for you:

Career changers: seeking a skilled trade with strong, consistent local demand.
Automotive technicians: looking to add a specialised, revenue-generating service.
Recent graduates: entering the workforce through a hands-on technical career path.
Entrepreneurs: planning to launch or expand a mobile glass service business.
Shop assistants: ready to move from support roles into certified installer positions.
Veterans: transitioning into civilian trades that reward precision and discipline.

What our students say

Your lessons are perfect. I purchased the one-year package and finally have the opportunity to follow various topics of interest without needing to change platforms... I'm grateful for everything you do, I've already recommended you to other people...