Fire Protection Course

Lesson 1 • Heat Transfer Mechanisms

Explains conduction, convection, and radiation as fire spread pathways. Connects heat transfer theory to building design and suppression strategy.

Lesson 2 • Chemistry of Combustion

Covers the fire tetrahedron, oxidation reactions, and fuel types. Provides the chemical basis for all subsequent fire suppression and prevention concepts.

Lesson 3 • Stages of Fire Development

Examines incipient, growth, fully developed, and decay phases. Understanding each stage guides suppression timing and evacuation decisions.

Lesson 4 • Fire Behavior in Enclosures

Analyzes how compartment geometry, ventilation, and fuel load affect fire dynamics. Prepares students to predict fire spread within buildings.

Lesson 1 • Occupancy-Specific Hazard Profiles

Examines hazard profiles for residential, commercial, industrial, and assembly occupancies. Enables students to tailor assessments to specific building uses.

Lesson 2 • Hazard Recognition Principles

Introduces ignition sources, fuel inventories, and oxygen availability as the three hazard pillars. Builds a structured observation framework for field assessments.

Lesson 3 • Documenting and Communicating Risk

Teaches structured report writing, risk registers, and stakeholder briefings. Ensures assessment findings drive actionable fire safety improvements.

Lesson 4 • Risk Assessment Methodologies

Covers qualitative and semi-quantitative risk matrices, likelihood-consequence scoring, and risk ranking. Connects assessment outputs to mitigation priority decisions.

Lesson 1 • Principles of Fire Prevention

Establishes the hierarchy of controls applied to fire prevention: elimination, substitution, engineering, and administrative measures. Frames all subsequent prevention strategies.

Lesson 2 • Fire Prevention Plan Development

Guides students through drafting a written fire prevention plan including responsibilities, procedures, and review cycles. Produces a deployable facility document.

Lesson 3 • Housekeeping and Storage Practices

Covers combustible waste management, safe storage spacing, and aisle clearance requirements. Directly reduces fuel load and ignition opportunity in any facility.

Lesson 4 • Ignition Source Control

Addresses hot work permits, electrical safety, smoking policies, and open flame management. Systematically eliminates the most common ignition sources in workplaces.

Lesson 1 • Construction Types and Fire Performance

Classifies buildings by construction type and correlates each type with fire resistance duration and collapse risk. Establishes the structural context for all fire protection decisions.

Lesson 2 • Passive Fire Protection Elements

Examines fire barriers, smoke barriers, fire walls, and fire partitions as passive containment systems. Shows how passive elements limit fire and smoke spread between compartments.

Lesson 3 • Means of Egress Design

Covers exit access, exit, and exit discharge components, including travel distance and capacity requirements. Links egress design to occupant life safety outcomes.

Lesson 4 • Fire-Resistive Assemblies

Covers rated wall, floor, and ceiling assemblies, including tested configurations and hourly ratings. Connects assembly selection to compartmentalization and occupant protection goals.

Lesson 1 • Detection System Fundamentals

Introduces initiating devices, notification appliances, and control panels as the core system components. Establishes the signal pathway from detection to occupant notification.

Lesson 2 • Flame and Specialty Detectors

Covers UV, IR, and multi-spectrum flame detectors plus gas and carbon monoxide detection. Addresses high-hazard environments where standard smoke detection is insufficient.

Lesson 3 • Alarm System Design and Zoning

Teaches detector spacing, zoning strategies, and addressable vs. conventional system layouts. Connects design decisions to rapid alarm response and accurate fault location.

Lesson 4 • Smoke and Heat Detector Technologies

Compares ionization, photoelectric, beam, and aspirating smoke detectors alongside fixed and rate-of-rise heat detectors. Guides technology selection based on environment and hazard.

Lesson 1 • Standpipe and Portable Extinguisher Systems

Addresses Class I, II, and III standpipe systems and portable extinguisher selection, placement, and inspection. Provides manual suppression capability as a complement to automatic systems.

Lesson 2 • Special Hazard Suppression Systems

Covers clean agent, CO2, dry chemical, foam, and water mist systems for environments where water is unsuitable. Matches suppression agent to specific hazard and occupancy.

Lesson 3 • Automatic Sprinkler System Fundamentals

Covers wet, dry, pre-action, and deluge sprinkler systems, including operating principles and application criteria. Establishes sprinklers as the primary automatic suppression tool.

Lesson 4 • Sprinkler Head Selection and Spacing

Addresses standard, extended coverage, ESFR, and residential sprinkler heads with spacing and obstruction rules. Links head selection to hazard classification and ceiling geometry.

Lesson 1 • Fire Safety Management Systems

Applies a plan-do-check-act management cycle to fire safety, including policy, objectives, and performance indicators. Embeds fire safety into organizational management practice.

Lesson 2 • Emergency Action Plan Components

Defines required EAP elements: alarm procedures, evacuation routes, assembly points, and accountability. Provides the structural template for all facility emergency planning.

Lesson 3 • Post-Incident Investigation and Reporting

Teaches cause-and-origin investigation methods, evidence preservation, and incident report writing. Converts incident data into prevention improvements and regulatory submissions.

Lesson 4 • Incident Command and Coordination

Introduces the incident command structure, roles, and communication protocols for fire emergencies. Ensures facility personnel integrate effectively with responding fire services.

Lesson 1 • Fire Safety Inspection Process

Covers pre-inspection preparation, inspection sequencing, deficiency documentation, and follow-up procedures. Prepares students to conduct and respond to regulatory inspections.

Lesson 2 • Regulatory Framework Overview

Maps the hierarchy of fire safety regulations, model codes, and standards from national to local levels. Establishes how regulatory documents interact and which takes precedence.

Lesson 3 • Enforcement and Legal Considerations

Addresses notice of violation procedures, appeals, stop-work orders, and civil liability concepts. Equips students to manage enforcement actions and understand legal exposure.

Lesson 4 • Occupancy Classification and Requirements

Applies occupancy classification systems to determine applicable fire protection requirements. Links occupancy type to specific detection, suppression, and egress obligations.