Automotive tire training

Lesson 1 • Tire Construction Methods

Explains radial, bias-ply, and run-flat construction processes. Connects manufacturing method to load capacity and ride behavior.

Lesson 2 • Industry Standards and Markings

Decodes sidewall markings including size, load index, speed rating, and certification symbols. Enables accurate tire identification and selection.

Lesson 3 • Tire Anatomy and Components

Covers bead, sidewall, tread, belt, and ply structures. Establishes the vocabulary needed for all subsequent technical instruction.

Lesson 1 • Seasonal and Weather Performance

Compares summer, all-season, and winter tire compounds and tread designs. Guides appropriate tire selection for varying climate conditions.

Lesson 2 • Contact Patch and Load Distribution

Analyzes how inflation pressure and load affect contact patch shape and size. Establishes the link between footprint geometry and grip.

Lesson 3 • Traction, Braking, and Cornering

Covers friction coefficients, slip angle, and braking force distribution. Connects tire grip limits to safe vehicle operation.

Lesson 4 • Noise, Vibration, and Ride Comfort

Identifies sources of tire noise and vibration including tread pattern and road texture. Links these factors to customer comfort expectations.

Lesson 1 • Abnormal Wear Pattern Diagnosis

Identifies center, edge, one-sided, and feathering wear patterns. Links each pattern to specific vehicle alignment or inflation causes.

Lesson 2 • Tread Depth Measurement

Teaches use of depth gauges and tread wear indicators to quantify remaining tread. Connects measurements to legal minimums and safety thresholds.

Lesson 3 • Damage Assessment and Repair Eligibility

Evaluates punctures, cuts, and impact damage against industry repair standards. Determines whether a tire is repairable or must be replaced.

Lesson 1 • Demounting Sequence

Details step-by-step bead breaking, valve core removal, and tire removal. Emphasizes techniques that protect bead area integrity.

Lesson 2 • Wheel and Rim Inspection

Covers inspection of rim flanges, bead seats, and valve holes before mounting. Prevents mounting defects caused by damaged or corroded wheels.

Lesson 3 • Mounting Sequence and Inflation

Guides correct bead lubrication, seating, and staged inflation to rated pressure. Ensures bead seating safety and proper final pressure.

Lesson 4 • Special Fitment Challenges

Addresses run-flat, asymmetric, and directional tire mounting requirements. Prevents incorrect fitment that compromises safety and performance.

Lesson 1 • Road Force Balancing

Introduces road force variation measurement and its role in diagnosing residual vibration. Extends standard balancing to solve complex vibration cases.

Lesson 2 • Balancer Setup and Calibration

Covers wheel mounting, dimension entry, and calibration verification on spin balancers. Accurate setup is prerequisite to reliable balance readings.

Lesson 3 • Imbalance Types and Effects

Distinguishes static, dynamic, and couple imbalance and their vibration signatures. Provides the diagnostic framework for selecting the correct correction method.

Lesson 1 • Inflation Pressure Fundamentals

Explains pressure units, temperature effects, and vehicle placard requirements. Establishes correct pressure as the single most critical tire maintenance factor.

Lesson 2 • Pressure Gauge Selection and Use

Compares stick, dial, and digital gauges for accuracy and application suitability. Ensures technicians select and use gauges that meet service precision needs.

Lesson 3 • TPMS System Types and Components

Differentiates direct and indirect TPMS architectures and their sensor components. Builds system knowledge required for accurate diagnosis and service.

Lesson 4 • TPMS Fault Diagnosis

Uses scan tools and TPMS activation tools to isolate sensor and system faults. Connects diagnostic findings to correct repair actions.

Lesson 1 • Post-Repair Inspection and Inflation

Covers visual and inflation testing of completed repairs before returning the tire to service. Confirms repair integrity and documents the work performed.

Lesson 2 • Plug-Patch Application

Guides cement application, plug-patch insertion, and stitching for a complete inner repair. Ensures the repair seals both the injury channel and inner liner.

Lesson 3 • Injury Preparation and Buffing

Details removal of the penetrating object, injury probing, and buffing the repair area. Proper preparation is critical to patch adhesion and long-term seal.

Lesson 1 • Alignment Fundamentals for Tire Life

Covers camber, caster, and toe settings and their direct effect on tire wear. Identifies when alignment correction is required to protect new tires.

Lesson 2 • Tire Selection Criteria

Evaluates load capacity, speed rating, OE fitment, and application requirements for selection. Enables accurate tire recommendations for diverse customer needs.

Lesson 3 • Rotation Patterns and Intervals

Explains forward cross, rearward cross, X-pattern, and side-to-side rotation methods. Matches rotation pattern to drivetrain and tire type for even wear.

Lesson 4 • Fleet Tire Tracking and Reporting

Introduces mileage tracking, tread depth logging, and cost-per-mile analysis for fleets. Builds skills to manage tire assets and reduce total fleet operating costs.