Bicycle Mechanic Course
Learn every skill a professional bicycle mechanic needs, from flat repairs and wheel truing to hydraulic brake bleeding and electronic drivetrain calibration. This course covers the full range of bicycle systems, including suspension, e-bikes, and complete bike builds. Whether you want to work in a shop or service your own bikes at a high level, this is the training that gets you there.
What you will learn:
You will learn how to set up a safe, efficient repair workspace and identify every component on a modern bicycle. The course walks you through tire and tube service, wheel truing, and full drivetrain maintenance on both mechanical and electronic groupsets. You will service rim brakes, mechanical disc brakes, and hydraulic disc brakes, including fluid bleeding procedures. Suspension fork and rear shock setup, seal replacement, and pivot bearing service are covered in detail. You will also learn how to assemble a complete bicycle from a bare frame and perform a professional pre-delivery inspection. Specialty topics include e-bike systems, cargo bikes, wheel building from scratch, and basic shop management skills.
How you study in practice Bicycle Mechanic Course
How you practise Bicycle Mechanic Course
For companies looking to train their team
With Dedika for Business, the course includes exercises and examples tailored to your own business and the way your company needs.
Course Content
8 Chapters • 36 LessonsDuration between 4 and 360 hours (you decide)
Chapter 1HideHide detailsSee detailsIntroduction to Bicycle Mechanics
Introduction to Bicycle Mechanics
Lesson 1 • Reading Manufacturer Specifications
Teaches interpretation of torque values, compatibility charts, and service manuals. Prevents damage caused by guesswork during assembly and repair.
Lesson 2 • Bicycle Anatomy and Component Overview
Covers frame geometry, drivetrain, braking, and steering systems. Establishes shared vocabulary used throughout the entire course.
Lesson 3 • Workshop Setup and Safety
Defines safe tool storage, chemical handling, and ergonomic workstand use. Directly supports efficient, injury-free repair practice.
Lesson 4 • Essential Hand Tools and Their Uses
Introduces hex keys, cone wrenches, cable cutters, and torque wrenches. Students match each tool to its correct application before touching a bicycle.
Chapter 2HideHide detailsSee detailsTires, Tubes, and Wheels
Tires, Tubes, and Wheels
Lesson 1 • Hub Inspection and Adjustment
Addresses cup-and-cone bearing adjustment and cartridge hub service. Connects wheel performance to proper hub bearing preload.
Lesson 2 • Tubeless Setup and Maintenance
Explains rim tape sealing, sealant injection, and burping techniques. Extends tire skills to the growing tubeless market segment.
Lesson 3 • Tire Types and Selection
Compares clincher, tubeless, and tubular tires by application and terrain. Guides correct tire choice before any installation work begins.
Lesson 4 • Wheel Truing and Spoke Tensioning
Teaches lateral and radial truing using a truing stand and tension meter. Produces wheels that run straight and maintain even spoke tension.
Lesson 5 • Tube Repair and Replacement
Covers puncture diagnosis, patch application, and tube installation technique. Builds the most frequently requested roadside and shop repair skill.
Chapter 3HideHide detailsSee detailsDrivetrain Fundamentals
Drivetrain Fundamentals
Lesson 1 • Crankset and Bottom Bracket Service
Removes, inspects, and installs threaded and press-fit bottom brackets and cranks. Provides the mechanical foundation for all pedaling force transfer.
Lesson 2 • Cassette and Freewheel Service
Covers cassette removal, inspection, and installation using lockring tools. Builds on chain knowledge to complete rear drivetrain service.
Lesson 3 • Chain Inspection and Replacement
Uses a chain wear indicator to measure stretch and determine replacement intervals. Prevents premature cassette and chainring wear.
Lesson 4 • Front Derailleur Adjustment
Positions the front derailleur cage and sets limit screws for clean chainline shifts. Completes full drivetrain tuning started with the rear derailleur.
Lesson 5 • Rear Derailleur Adjustment
Sets limit screws, cable tension, and B-screw for accurate rear shifting. Directly applies chain and cassette knowledge to full system tuning.
Chapter 4HideHide detailsSee detailsBraking Systems
Braking Systems
Lesson 1 • Hydraulic Disc Brake Bleeding
Performs mineral oil and DOT fluid bleeding procedures to remove air from brake lines. Restores firm lever feel and consistent modulation.
Lesson 2 • Brake Pad and Rotor Replacement
Selects correct pad compound and rotor size, then installs and beds in new components. Ensures full braking performance after parts replacement.
Lesson 3 • Mechanical Disc Brake Service
Adjusts pad contact, cable pull, and rotor alignment on cable-actuated disc brakes. Bridges rim brake skills to the disc brake platform.
Lesson 4 • Rim Brake Adjustment and Pad Replacement
Covers caliper centering, pad toe-in, and cable tension for dual-pivot and V-brakes. Establishes brake fundamentals before advancing to disc systems.
Chapter 5HideHide detailsSee detailsSteering and Headset Systems
Steering and Headset Systems
Lesson 1 • Stem and Handlebar Fitting
Selects stem length and rise, then installs handlebars to correct width and rotation. Connects mechanical setup to rider comfort and control.
Lesson 2 • Fork Inspection and Replacement
Inspects fork blades for cracks, measures steerer length, and installs a new fork. Addresses the most safety-critical steering component.
Lesson 3 • Headset Standards and Identification
Distinguishes threaded, threadless, integrated, and semi-integrated headset types. Prevents incorrect part ordering and installation errors.
Lesson 4 • Headset Installation and Adjustment
Presses cups, installs bearings, and sets preload for smooth, play-free steering. Builds directly on headset identification knowledge.
Chapter 6HideHide detailsSee detailsSuspension Systems
Suspension Systems
Lesson 1 • Suspension Fundamentals and Terminology
Defines travel, sag, rebound, compression, and lockout across suspension types. Provides the vocabulary needed for all subsequent suspension work.
Lesson 2 • Suspension Pivot and Linkage Service
Removes, cleans, and repacks pivot bearings and bushings on full-suspension frames. Ensures accurate suspension kinematics and frame longevity.
Lesson 3 • Rear Shock Setup and Basic Service
Adjusts air pressure, volume spacers, and rebound on rear shocks for full-suspension bikes. Extends fork skills to the rear suspension system.
Lesson 4 • Fork Setup and Sag Adjustment
Sets air pressure or spring preload to achieve correct sag for rider weight. Directly applies suspension terminology to real-world setup.
Lesson 5 • Fork Lower Leg Service
Removes lower legs, replaces foam rings and seals, and refills oil volume. Restores smooth fork action and prevents stiction.
Chapter 7HideHide detailsSee detailsElectronic and Wireless Drivetrain Systems
Electronic and Wireless Drivetrain Systems
Lesson 1 • Electronic Shifting System Overview
Compares wired and wireless electronic groupsets by architecture and power source. Establishes the conceptual framework before any hands-on configuration.
Lesson 2 • Diagnostics and Troubleshooting
Interprets error codes, tests connections, and resolves shifting faults systematically. Builds diagnostic confidence for electronic system failures.
Lesson 3 • Component Installation and Wiring
Routes cables or charges wireless units and mounts derailleurs, levers, and batteries. Applies mechanical installation skills to electronic components.
Lesson 4 • System Configuration and Calibration
Uses manufacturer apps to set shift points, synchronize components, and update firmware. Produces precise, consistent electronic shifting performance.
Chapter 8HideHide detailsSee detailsComplete Bicycle Assembly and Quality Control
Complete Bicycle Assembly and Quality Control
Lesson 1 • Final Adjustment and System Tuning
Fine-tunes shifting, braking, and bearing preload after full assembly. Confirms all systems interact correctly under simulated riding conditions.
Lesson 2 • Frame Preparation and Parts Sourcing
Faces and taps frame interfaces, chases threads, and verifies parts compatibility. Prevents assembly errors before any component is installed.
Lesson 3 • Cable and Housing Setup
Cuts, routes, and tensions shift and brake cables for optimal feel and longevity. Finalizes mechanical control systems before final adjustment.
Lesson 4 • Sequential Component Installation
Installs components in the correct order to avoid rework and torque conflicts. Applies every chapter's skills in a single integrated workflow.
Lesson 5 • Pre-Delivery Inspection and Documentation
Executes a structured safety checklist and records all torque values and parts used. Delivers a documented, professional-grade bicycle to the customer.
Your valid completion certificate
This course is for you:
Cycling enthusiast: wants to stop paying for every minor repair.
Career changer: looking for a skilled trade with steady local demand.
Bike shop employee: needs structured training to back up hands-on experience.
Outdoor recreation guide: must keep client bikes safe and trail-ready.
Commuter cyclist: tired of being stranded by mechanical failures mid-ride.
Entrepreneur: planning to open a mobile or storefront repair business.
What our students say
Your classes are perfect. I purchased the one-year package and finally have the opportunity to follow various topics of interest without needing to switch platforms... I thank you for everything you do, I've already recommended you to other people...
I like how the lessons are straight to the point and how I can change chapters and skip content I don't need.
I like the content and the presentation style and video transcription, which speeds up the process!
The platform is fast, simple to use. The diversity of content and complementary videos really help with learning.
Top training programs
FAQ
Who is Dedika?
Is the certificate valid in Canada?
Are the courses free?
What is the course workload?
What are the courses like?
How do the courses work?
What is the duration of the courses?
What is the cost or price of the courses?
What is an EAD or online course and how does it work?
PDF Course