Fast Track Electrician Course

Lesson 1 • Basic Electrical Theory

Covers voltage, current, resistance, and power relationships using Ohm's Law. Establishes the quantitative language used throughout the entire course.

Lesson 2 • Personal Protective Equipment

Specifies PPE categories, ratings, and correct usage for electrical tasks. Ensures students select appropriate protection before any hands-on work.

Lesson 3 • Electrical Hazards and Risk

Identifies shock, arc flash, and fire hazards present in electrical work. Connects hazard awareness to the safety protocols introduced next.

Lesson 4 • Electrical Codes and Standards Overview

Introduces the purpose and structure of national electrical installation standards. Provides regulatory context applied in every installation chapter that follows.

Lesson 1 • Test and Measurement Instruments

Introduces multimeters, clamp meters, and voltage testers for field diagnostics. Accurate measurement underpins safe troubleshooting covered in later chapters.

Lesson 2 • Power Tools and Drilling Equipment

Teaches safe operation of drills, hole saws, and reciprocating saws for rough-in work. Builds speed and accuracy needed for conduit and box installation.

Lesson 3 • Conductors and Insulation Types

Explains wire gauges, ampacity ratings, and insulation temperature ratings. Correct conductor selection is prerequisite knowledge for wiring installations.

Lesson 4 • Reading Blueprints and Diagrams

Teaches interpretation of electrical floor plans, single-line diagrams, and schedules. Blueprint literacy is required for every installation project in the course.

Lesson 1 • Conduit Bending Techniques

Covers stub-up, back-to-back, offset, and saddle bends using hand and mechanical benders. Accurate bending eliminates conductor damage and ensures neat, inspectable runs.

Lesson 2 • Cutting, Threading, and Joining Conduit

Teaches pipe cutting, reaming, threading, and coupling methods for metal conduit. Proper joining prevents sharp edges that damage insulation during wire pulling.

Lesson 3 • Conduit Support and Mounting

Specifies support spacing, strapping methods, and anchor hardware for conduit systems. Correct support intervals are a code requirement verified during inspection.

Lesson 4 • Wire Pulling and Fill Calculations

Covers conduit fill limits, pulling tension, and lubricant use for safe conductor installation. Fill calculations prevent overheating and are required before pulling any wire.

Lesson 1 • Cable Wiring Methods

Covers NM, MC, and AC cable installation in residential and light commercial settings. Cable methods are the most common wiring approach in low-rise construction.

Lesson 2 • GFCI and AFCI Protection

Explains ground-fault and arc-fault protection requirements and device installation. These protective devices are mandatory in many locations under current standards.

Lesson 3 • Electrical Box Selection and Installation

Covers metal and plastic box types, volume calculations, and mounting methods. Correct box selection and fill compliance are prerequisites for device installation.

Lesson 4 • Splicing and Termination Techniques

Teaches wire nut, push-in, and lug termination methods for reliable connections. Poor splices are a leading cause of electrical failures and fire hazards.

Lesson 1 • Grounding System Design

Covers grounding electrode conductors, electrode types, and system grounding points. A properly designed grounding system limits voltage rise during fault conditions.

Lesson 2 • Equipment Bonding Methods

Teaches bonding of metal enclosures, raceways, and structural steel to the grounding system. Bonding ensures fault current returns safely to the source for overcurrent operation.

Lesson 3 • Surge and Lightning Protection

Covers surge protective device types, installation locations, and lightning protection basics. Surge protection safeguards sensitive equipment from transient voltage events.

Lesson 4 • Overcurrent Protection Principles

Explains fuse and circuit breaker operation, interrupting ratings, and coordination. Proper overcurrent protection prevents conductor damage and equipment destruction.

Lesson 1 • Residential Load Calculations

Applies standard calculation methods to size service entrance and branch circuits. Accurate load calculations prevent undersized wiring and tripped breakers.

Lesson 2 • Rough-In to Finish Inspection Sequence

Walks through rough-in, cover, and final inspection stages with checklist criteria. Understanding inspection stages helps students plan work to pass on the first attempt.

Lesson 3 • Residential Panel Installation

Teaches mounting, grounding, bonding, and breaker installation in a residential panel. Panel work is the central hub connecting service entrance to all branch circuits.

Lesson 4 • Branch Circuit Design and Layout

Covers circuit types, outlet spacing rules, and circuit assignment for a residence. Proper layout minimises voltage drop and balances panel loading.

Lesson 1 • Commercial Panel and Switchboard Wiring

Covers installation of commercial panelboards, switchboards, and branch circuit breakers. Commercial distribution equipment handles higher currents than residential panels.

Lesson 2 • Commercial Lighting Systems

Covers fluorescent, LED, and HID fixture wiring, ballasts, and emergency lighting. Lighting circuits represent a large portion of commercial electrical installations.

Lesson 3 • Three-Phase Power Fundamentals

Explains wye and delta configurations, phase relationships, and voltage calculations. Three-phase knowledge is required for all commercial and industrial work ahead.

Lesson 4 • Motor Branch Circuit Wiring

Teaches sizing conductors, overcurrent protection, and disconnects for motor circuits. Motors require unique protection methods distinct from standard branch circuits.

Lesson 1 • Troubleshooting Lighting and HVAC Circuits

Applies diagnostic skills to lighting ballasts, LED drivers, and HVAC control wiring. These circuits combine electrical and mechanical systems common in commercial buildings.

Lesson 2 • Diagnosing Open and Short Circuits

Teaches voltage, continuity, and resistance tests to locate opens and shorts. These are the two most common fault types encountered in field service work.

Lesson 3 • Preventive Maintenance Procedures

Establishes inspection intervals, thermal scanning, and connection retorquing schedules. Preventive maintenance reduces unplanned downtime and extends equipment life.

Lesson 4 • Systematic Troubleshooting Methodology

Introduces a structured fault-finding process: observe, isolate, test, and repair. A repeatable method reduces diagnostic time and prevents misdiagnosis on the job.