Solar Panel Course

Lesson 1 • Solar Radiation and the Sun

Covers solar spectrum, irradiance, and how atmospheric conditions affect energy delivery. Grounds all subsequent panel performance analysis in measurable physical inputs.

Lesson 2 • Photovoltaic Effect Explained

Explains the semiconductor physics behind electron excitation and current generation. Connects atomic-level behaviour to observable panel output.

Lesson 3 • Key Performance Metrics

Introduces efficiency, fill factor, and standard test conditions as universal benchmarks. Enables students to read and compare manufacturer datasheets accurately.

Lesson 4 • Solar Cell Structure and Materials

Examines p-n junction architecture and common cell materials including silicon variants. Provides the material science basis for comparing cell technologies.

Lesson 1 • Polycrystalline Panel Technology

Covers casting-based manufacturing, efficiency trade-offs, and cost advantages of polycrystalline panels. Positions this technology within budget-sensitive project scenarios.

Lesson 2 • Thin-Film Panel Technologies

Examines CdTe, CIGS, and amorphous silicon thin-film variants and their low-light performance. Highlights applications where flexibility and weight matter most.

Lesson 3 • Monocrystalline Panel Technology

Details manufacturing process, efficiency range, and ideal use cases for monocrystalline panels. Establishes the premium benchmark against which other technologies are measured.

Lesson 4 • Reading and Comparing Datasheets

Teaches systematic datasheet analysis using real specification formats across panel types. Enables confident, data-driven panel selection for any project context.

Lesson 1 • Wiring, Combiner Boxes, and Disconnects

Covers conductor sizing, combiner box function, and disconnect switch requirements for safe system assembly. Provides the electrical infrastructure knowledge needed before installation work.

Lesson 2 • Charge Controllers and Regulation

Distinguishes PWM and MPPT charge controllers and their roles in protecting and optimising battery charging. Directly supports off-grid and hybrid system design decisions.

Lesson 3 • Monitoring and Communication Systems

Introduces production monitoring platforms, data loggers, and communication protocols used in solar systems. Enables students to specify and configure performance tracking from day one.

Lesson 4 • Battery Storage Systems

Explains lead-acid, lithium-ion, and flow battery chemistries and their integration with solar arrays. Establishes storage sizing logic used in off-grid and hybrid designs.

Lesson 1 • Shading Analysis Techniques

Teaches use of solar pathfinders, drone imagery, and software tools to quantify shading losses. Directly informs panel placement and inverter topology selection.

Lesson 2 • Site Survey Methodology

Establishes a structured site visit process covering physical, electrical, and structural data collection. Forms the foundation for all subsequent design and feasibility decisions.

Lesson 3 • Feasibility and Load Analysis

Guides energy consumption analysis and offset potential calculation to establish project feasibility. Bridges site data to the system sizing process in the next chapter.

Lesson 4 • Solar Resource Data and Tools

Introduces irradiance databases, satellite data sources, and meteorological datasets for resource quantification. Enables accurate energy yield predictions grounded in real climate data.

Lesson 1 • Off-Grid System Sizing

Teaches load-based battery bank sizing, panel array calculation, and generator backup integration. Ensures energy autonomy under worst-case solar resource conditions.

Lesson 2 • Tilt, Orientation, and Layout Optimisation

Applies trigonometric and software methods to optimise panel tilt, azimuth, and physical layout. Maximises annual energy yield within the physical constraints of the site.

Lesson 3 • Design Documentation and Compliance

Covers permit drawing standards, equipment schedules, and regulatory submission requirements. Ensures designs are ready for authority review and contractor execution.

Lesson 4 • Grid-Tied System Design

Covers array sizing, inverter matching, and interconnection requirements for utility-connected systems. Produces a design that maximises energy offset within utility constraints.

Lesson 1 • Safety Protocols and PPE

Establishes electrical and fall-protection safety standards mandatory before any installation activity. Grounds all hands-on work in a non-negotiable safety-first culture.

Lesson 2 • Commissioning and System Startup

Guides pre-energisation checks, inverter startup sequence, and initial performance verification. Confirms the system operates safely and at expected output before handover.

Lesson 3 • Mounting System Installation

Covers rail-based, ballasted, and ground-mount racking installation techniques and fastener torque specs. Ensures structural integrity and weatherproofing of the mounting foundation.

Lesson 4 • Panel Handling and Placement

Teaches safe panel lifting, positioning, and clamp-based securing to minimise damage and injury. Directly affects long-term panel performance and warranty validity.

Lesson 1 • Thermal and Visual Inspection

Introduces infrared thermography and visual inspection protocols for detecting cell and module defects. Enables non-invasive identification of hotspots, delamination, and soiling patterns.

Lesson 2 • Preventive Maintenance Programmes

Establishes scheduled cleaning, inspection, and component testing routines to maximise system lifespan. Translates diagnostic knowledge into a proactive maintenance calendar.

Lesson 3 • Performance Monitoring and Analysis

Teaches interpretation of monitoring data to detect underperformance, degradation, and anomalies. Connects real-time data to actionable maintenance and design improvement decisions.

Lesson 4 • Electrical Testing Techniques

Covers multimeter, clamp meter, and IV curve tracer use for panel and string-level electrical testing. Provides the hands-on measurement skills needed to confirm or rule out component faults.

Lesson 1 • Incentives, Rebates, and Tax Structures

Surveys investment tax credits, production incentives, and depreciation mechanisms available to solar projects. Equips students to maximise financial returns through available fiscal instruments.

Lesson 2 • Proposal Development and Sales

Guides creation of compelling customer proposals integrating technical design and financial projections. Bridges engineering outputs to customer-facing communication and decision support.

Lesson 3 • Solar Project Economics

Covers levelised cost of energy (LCOE), simple payback, and net present value for solar investments. Enables students to quantify financial value for any residential or commercial project.

Lesson 4 • Project Management and Permitting

Covers permit application workflows, utility interconnection processes, and project scheduling fundamentals. Ensures students can manage a project from signed contract to energised system.