Car Wrapping Course

Lesson 1 • Types of Vinyl Wrap Films

Introduces cast, calendered, and specialty vinyl films and their properties. Students match film types to appropriate vehicle applications.

Lesson 2 • Understanding Vinyl Adhesive Technology

Explains pressure-sensitive adhesive systems, air-release channels, and repositionability. This knowledge guides correct application pressure and timing decisions.

Lesson 3 • Workspace Setup and Safety

Defines ideal environmental conditions and safety protocols for a wrap bay. A controlled workspace prevents contamination and reduces installation errors.

Lesson 4 • The Car Wrapping Industry Overview

Covers the history, market scope, and career paths in vehicle wrapping. Establishes context for why wrapping skills are commercially valuable.

Lesson 1 • Handling Problematic Surfaces

Addresses wrapping over textured paint, body filler, and aftermarket coatings. Students apply primers and adhesion promoters where standard prep is insufficient.

Lesson 2 • Panel Disassembly for Clean Edges

Demonstrates removing trim, badges, and moldings to achieve seamless wrap edges. Proper disassembly eliminates visible seams and reduces long-term lifting risk.

Lesson 3 • Washing and Degreasing Techniques

Covers two-bucket wash methods, clay bar decontamination, and solvent degreasing. Each step removes contaminants that compromise adhesive bonding.

Lesson 1 • Heat Application and Post-Heating

Explains how heat activates adhesive, relaxes film memory, and conforms vinyl to contours. Post-heating locks film in place and prevents shrinkage-related lifting.

Lesson 2 • Dry and Wet Application Methods

Compares dry application for repositionable films and wet application for large panels. Students select the correct method based on film type and panel size.

Lesson 3 • Squeegee Techniques for Flat Panels

Builds muscle memory for consistent squeegee angles, overlap strokes, and edge sealing. Correct technique eliminates air entrapment on doors, bonnets, and roofs.

Lesson 4 • Measuring and Cutting Vinyl

Teaches accurate panel measurement, film layout, and cutting with minimal waste. Precise cutting reduces material cost and simplifies the installation process.

Lesson 1 • Understanding Film Stretch Limits

Explains elongation percentages for cast and calendered films and how overstretching causes failure. Students test film limits before committing to complex panel installations.

Lesson 2 • Roof and A-Pillar Wrapping

Addresses the unique challenges of large flat roofs combined with curved A-pillar transitions. Proper film anchoring and sequential squeegee work prevent wrinkles on large surfaces.

Lesson 3 • Bumper and Fascia Wrapping

Covers full bumper wraps including grille surrounds, vents, and lower fascias. Students manage large film pieces over compound curves using heat and tension control.

Lesson 4 • Relief Cuts and Bridging Techniques

Teaches strategic relief cuts that release tension on concave and convex surfaces. Bridging maintains film integrity across deep recesses without visible cuts.

Lesson 1 • Door and Quarter Panel Wrapping

Covers full door wraps including jamb edges and quarter panel transitions. Students achieve clean door-to-quarter seams that align with body lines.

Lesson 2 • Roof, Bonnet, and Boot Execution

Applies large-panel techniques to the three biggest surfaces on a vehicle. Consistent squeegee pressure and film tension prevent waves and distortion on flat expanses.

Lesson 3 • Final Inspection and Quality Control

Defines a systematic post-installation inspection checklist for bubbles, lifting edges, and colour consistency. Quality control before delivery prevents costly callbacks.

Lesson 4 • Planning the Wrap Sequence

Establishes the optimal order for wrapping panels to maintain colour continuity and minimise handling damage. Sequence planning reduces rework and total installation time.

Lesson 1 • Designing Partial Wrap Layouts

Covers layout principles for partial wraps that complement vehicle body lines and proportions. Good design decisions made before cutting save material and installation time.

Lesson 2 • Printed Graphic Film Handling

Addresses the unique handling requirements of printed and laminated graphic films. Improper handling causes delamination, colour shift, and adhesive contamination.

Lesson 3 • Racing Stripes and Decal Alignment

Teaches precise measurement and alignment techniques for stripes and decals across multiple panels. Consistent alignment across panel gaps is the mark of professional work.

Lesson 1 • Assessing Paint Condition After Removal

Identifies paint oxidation, staining, and mechanical damage revealed after wrap removal. Accurate assessment determines whether correction or respraying is required.

Lesson 2 • Safe Wrap Removal Techniques

Covers heat-assisted removal methods that minimise paint stress and film tearing. Controlled removal speed and angle are critical to protecting the underlying surface.

Lesson 3 • Paint Correction After Wrap Removal

Introduces light paint correction techniques to restore gloss and remove surface marring. Students perform single-stage polishing to prepare surfaces for re-wrapping or delivery.

Lesson 1 • Pricing Strategies and Quoting

Covers market-based, cost-plus, and value-based pricing models for wrap services. Students build quote templates that communicate value and close sales effectively.

Lesson 2 • Calculating Material and Labour Costs

Teaches accurate material estimation, waste factor calculation, and labour hour costing. Precise cost calculation is the foundation of profitable job pricing.

Lesson 3 • Workshop Workflow and Scheduling

Introduces job scheduling, bay utilisation, and turnaround time management for a wrap shop. Efficient workflow maximises revenue per bay and improves client satisfaction.

Lesson 4 • Marketing a Wrap Business

Covers portfolio building, social media strategy, and referral programmes for wrap shops. Consistent marketing generates a steady pipeline of new and repeat clients.