Draught Survey Course

Lesson 1 • Role and Purpose of Draught Surveys

Defines draught surveys as a cargo quantity verification method and explains their commercial and legal significance. Sets context for all subsequent technical content.

Lesson 2 • Key Terminology and Definitions

Introduces essential vocabulary including displacement, deadweight, freeboard, and trim. Precise language use is foundational to accurate survey reporting.

Lesson 3 • Vessel Architecture Relevant to Surveys

Covers the structural features of a ship that affect draught readings, including keel types and draught mark positions. Builds spatial understanding of the vessel.

Lesson 1 • Types and Formats of Draught Marks

Describes metric and imperial draught mark systems, including Arabic and Roman numeral formats. Understanding mark formats prevents misreading errors.

Lesson 2 • Recording Six-Point Draught Readings

Establishes the standard six-point reading protocol covering forward, midship, and aft positions on both sides. Consistent recording is essential for trim and list corrections.

Lesson 3 • Observing Draughts from the Waterline

Teaches correct positioning and sighting techniques for reading draughts from a boat or dock. Proper observation eliminates parallax and wave-induced errors.

Lesson 1 • Ship's Stability Booklet Overview

Explains the structure and content of the stability booklet, including hydrostatic tables and capacity plans. Familiarity with document layout speeds data retrieval during surveys.

Lesson 2 • Deadweight Survey Documents

Covers the deadweight scale, trim correction tables, and any vessel-specific addenda. These documents supplement hydrostatic tables for complete survey data.

Lesson 3 • Interpolating Hydrostatic Values

Teaches linear interpolation between tabulated draught values to obtain precise hydrostatic parameters. Interpolation accuracy directly affects the reliability of displacement results.

Lesson 4 • Verifying Document Authenticity

Explains how to confirm that ship documents are current, approved, and applicable to the vessel's current load condition. Document verification prevents calculation errors from outdated data.

Lesson 1 • Calculating the True Mean Draught

Guides students through the quarter-mean and true mean draught formulas using six-point readings. The true mean draught is the entry point for hydrostatic table lookup.

Lesson 2 • Understanding Trim and Its Effects

Explains how trim shifts the waterplane and displaces the centre of flotation, affecting draught readings. A clear trim concept is prerequisite to applying corrections correctly.

Lesson 3 • First and Second Trim Corrections

Applies the first trim correction using LCF and MTC, then the second correction for trim-induced LCF shift. Both corrections refine displacement accuracy.

Lesson 4 • List Correction Procedures

Addresses how vessel list causes asymmetric draught readings and explains the correction method. List correction ensures the mean draught reflects true displacement.

Lesson 1 • Determining Displacement from Tables

Uses the corrected true mean draught to extract displacement from hydrostatic tables via interpolation. This step converts a draught measurement into a mass value.

Lesson 2 • Calculating Deadweight from Displacement

Subtracts the lightweight of the vessel from corrected displacement to obtain total deadweight. Accurate lightweight data is essential for a valid result.

Lesson 3 • Deductibles: Constants and Consumables

Identifies all deductible items including fuel, ballast, fresh water, and constants, and explains how to measure or estimate each. Accurate deductibles isolate cargo weight.

Lesson 4 • Water Density Measurement and Correction

Explains how to sample dock water density and apply the salt-water equivalent correction to displacement. Density correction is critical in brackish or fresh water ports.

Lesson 1 • Handling Disputes and Protests

Prepares students to manage disagreements with vessel officers or terminal representatives professionally. Proper protest procedures protect all parties' commercial interests.

Lesson 2 • Final Survey Execution

Mirrors the initial survey procedure at the conclusion of cargo operations to determine final displacement. The difference between initial and final surveys yields cargo quantity.

Lesson 3 • Initial Survey Execution

Guides the surveyor through the initial (pre-loading or pre-discharge) draught reading and deductible measurement sequence. The initial survey establishes the baseline displacement.

Lesson 4 • Pre-Survey Preparation

Covers document collection, equipment checks, and coordination with vessel officers before boarding. Thorough preparation reduces delays and errors during the survey.

Lesson 1 • Completing Calculation Worksheets

Walks through the step-by-step completion of standard calculation worksheets used in the industry. Consistent worksheet use reduces transcription errors.

Lesson 2 • Report Review and Quality Control

Establishes a self-review checklist to verify arithmetic, unit consistency, and completeness before submission. Quality control prevents costly report corrections after issuance.

Lesson 3 • Record Retention and Confidentiality

Explains retention periods, secure storage, and confidentiality obligations for survey records. Proper record management supports future audits and dispute resolution.

Lesson 4 • Structure of a Draught Survey Report

Describes the standard sections of a draught survey report, from vessel particulars to final cargo weight. A well-structured report communicates results unambiguously.

Lesson 1 • Multi-Port and Partial Load Surveys

Addresses surveys conducted across multiple loading or discharge ports and the tracking of cumulative cargo quantities. Multi-port surveys require careful reconciliation of intermediate figures.

Lesson 2 • Hog and Sag Corrections

Explains how hull deflection under load creates hog or sag, distorting midship draught readings. Applying the hog/sag correction restores accuracy in displacement calculations.

Lesson 3 • Surveys on Barges and Non-Ship Vessels

Adapts standard survey procedures for barges, lighters, and other non-ship floating units with different document sets. Barge surveys require modified approaches to draught reading and documentation.

Lesson 4 • Large Trim and Non-Standard Conditions

Covers surveys on vessels with trim exceeding standard table ranges and explains extended correction methods. Large trim requires additional care to avoid significant displacement errors.