Fire Safety Inspection Course

Lesson 1 • Combustion Chemistry Basics

Covers the fire tetrahedron, oxidation reactions, and fuel types. Provides the chemical foundation for all subsequent hazard assessments.

Lesson 2 • Fuel Load and Occupancy Risk

Analyses how occupancy type and fuel load affect fire severity. Connects material quantities to inspection risk classifications.

Lesson 3 • Fire Behaviour and Spread

Examines heat transfer modes and flame propagation patterns. Links fire dynamics to inspection priorities in buildings.

Lesson 1 • Inspector Authority and Jurisdiction

Defines legal authority to inspect, right of entry, and enforcement powers. Clarifies boundaries of inspector jurisdiction across occupancy types.

Lesson 2 • Standards and Codes Overview

Introduces model fire codes, consensus standards, and their adoption process. Establishes the regulatory context inspectors operate within.

Lesson 3 • Inspection Documentation Requirements

Covers required records, inspection reports, and violation notices. Accurate documentation supports enforcement and legal defensibility.

Lesson 1 • Structural Vulnerabilities Under Fire

Identifies how heat degrades structural elements and creates collapse risk. Prepares inspectors to flag construction deficiencies affecting safety.

Lesson 2 • Compartmentalisation and Fire Barriers

Addresses fire walls, fire barriers, and smoke partitions as containment tools. Connects proper compartmentalisation to life safety outcomes.

Lesson 3 • Fire-Resistive Assemblies

Examines rated walls, floors, and ceilings and their tested performance. Inspectors learn to verify assembly integrity during inspections.

Lesson 4 • Renovation and Alteration Impacts

Evaluates how building modifications can compromise fire-resistive integrity. Inspectors learn to identify unauthorised or improper alterations.

Lesson 1 • Occupant Load and Capacity

Teaches occupant load calculation methods and minimum egress width requirements. Ensures inspectors can verify adequate capacity for any occupancy.

Lesson 2 • Egress System Components

Defines exit access, exit, and exit discharge as the three egress elements. Establishes the vocabulary and structure for all egress evaluations.

Lesson 3 • Emergency Lighting and Exit Signs

Covers illumination levels, backup power requirements, and sign placement standards. Inspectors learn to test and verify emergency egress lighting systems.

Lesson 4 • Exit Doors and Hardware

Inspects door swing direction, panic hardware, and locking device compliance. Covers the most frequently cited egress deficiencies in field inspections.

Lesson 1 • Special Detection Applications

Addresses detection in high-challenge environments such as clean rooms and atriums. Expands inspector competency beyond standard occupancy scenarios.

Lesson 2 • Fire Alarm Control Panels

Examines control panel functions, zone configurations, and power supply requirements. Inspectors learn to evaluate panel condition and documentation.

Lesson 3 • Notification Appliances

Covers audible and visual notification devices, placement, and decibel requirements. Connects notification adequacy to occupant response time.

Lesson 4 • Detector Types and Selection

Compares smoke, heat, flame, and gas detectors by operating principle. Enables inspectors to verify appropriate detector selection for each space.

Lesson 1 • Inspection, Testing, and Maintenance

Details required inspection frequencies, test types, and maintenance tasks per standards. Prepares inspectors to evaluate ITM compliance records.

Lesson 2 • Sprinkler System Types

Compares wet, dry, pre-action, and deluge systems by design and application. Establishes the basis for system-specific inspection procedures.

Lesson 3 • Water Supply and Hydraulics

Examines water supply sources, pressure requirements, and hydraulic design principles. Connects supply adequacy to system performance under fire conditions.

Lesson 4 • Common Deficiencies and Corrections

Identifies the most frequent sprinkler system violations found during inspections. Builds inspector confidence in citing and correcting deficiencies.

Lesson 1 • Foam and Water Mist Systems

Covers foam concentrate types, water mist applications, and inspection criteria. Expands inspector knowledge for industrial and high-value asset protection.

Lesson 2 • Kitchen Hood Suppression Systems

Addresses wet chemical suppression systems for commercial cooking equipment. Covers nozzle placement, fuel shutoff, and semi-annual inspection requirements.

Lesson 3 • Standpipe System Classes and Types

Defines Class I, II, and III standpipe systems and their intended users. Establishes inspection criteria for hose connections and pressure requirements.

Lesson 4 • Portable Fire Extinguisher Inspection

Covers extinguisher classification, placement, and monthly and annual inspection tasks. Inspectors learn to verify correct agent selection for hazard types.

Lesson 1 • High-Piled Storage Inspection

Examines rack storage configurations, commodity classification, and sprinkler design implications. Inspectors learn to evaluate warehouse storage compliance.

Lesson 2 • Flammable and Combustible Liquid Storage

Covers storage cabinet requirements, tank systems, and ventilation for flammable liquids. Inspectors learn to identify common storage violations in industrial settings.

Lesson 3 • Special Occupancy Inspection Procedures

Applies inspection techniques to healthcare, educational, and assembly occupancies. Addresses unique life safety requirements for vulnerable and high-density populations.

Lesson 4 • Compressed Gas and Cryogenic Storage

Addresses cylinder storage, securing methods, and separation requirements for compressed gases. Covers cryogenic liquid handling and inspection criteria.