Advanced Lighting Design and Luminotechnics

Lesson 1 • Colour Science Essentials

Introduces colorimetry, colour temperature, and colour rendering. Provides the vocabulary needed for lamp and source selection.

Lesson 2 • Radiometric vs. Photometric Quantities

Distinguishes energy-based radiometric units from human-vision-weighted photometric units. Enables correct unit selection in calculations.

Lesson 3 • Measurement Tools and Techniques

Surveys photometers, spectroradiometers, and goniophotometers. Establishes accurate field and laboratory measurement practice.

Lesson 4 • Human Visual System and Perception

Examines rod and cone function, adaptation, and contrast sensitivity. Links physiology to practical luminance and glare criteria.

Lesson 1 • Luminaire Optics and Photometry

Examines reflectors, refractors, lenses, and diffusers as optical control elements. Connects luminaire geometry to candela distribution.

Lesson 2 • Luminaire Selection Criteria

Applies performance, durability, and maintenance data to selection decisions. Integrates ingress protection, thermal ratings, and optical output.

Lesson 3 • Discharge Lamp Technologies

Covers fluorescent, metal halide, and high-pressure sodium operation. Addresses ballast requirements and spectral output differences.

Lesson 4 • LED Technology and Solid-State Lighting

Details semiconductor junction emission, phosphor conversion, and thermal management. Establishes LED as the dominant modern source.

Lesson 1 • Lighting Simulation Software Workflow

Guides the full simulation pipeline from geometry import to results validation. Ensures software outputs align with hand-calculation benchmarks.

Lesson 2 • Luminance and Contrast Calculations

Computes surface luminance from illuminance and reflectance. Evaluates contrast ratios against visual task requirements.

Lesson 3 • Zonal Cavity and Lumen Methods

Applies the zonal cavity method to predict average illuminance in interior spaces. Introduces room cavity ratio and coefficient of utilisation.

Lesson 4 • Glare Evaluation Methods

Quantifies discomfort and disability glare using standardised indices. Applies glare criteria to luminaire placement and shielding design.

Lesson 1 • Layered Lighting Strategy

Defines ambient, task, accent, and decorative layers and their interaction. Teaches compositional balance across all four layers.

Lesson 2 • Daylighting Integration

Combines electric lighting with daylight to maintain target illuminance and reduce energy use. Introduces daylight factor and climate-based metrics.

Lesson 3 • Space-Type Design Criteria

Applies recommended illuminance and uniformity targets to offices, retail, healthcare, and hospitality spaces. Connects standards to design decisions.

Lesson 4 • Lighting Design Process Overview

Maps the full design workflow from brief analysis to construction documentation. Establishes a repeatable professional methodology.

Lesson 1 • Pole and Mounting Height Selection

Determines pole spacing, mounting height, and overhang for target uniformity. Balances structural, aesthetic, and photometric constraints.

Lesson 2 • Facade and Architectural Floodlighting

Applies grazing, flooding, and silhouette techniques to building exteriors. Addresses aiming angles and luminance contrast for visual impact.

Lesson 3 • Roadway Lighting Photometric Criteria

Applies pavement luminance, illuminance, and uniformity criteria to road classification. Links traffic speed and volume to lighting class selection.

Lesson 4 • Light Pollution and Obtrusive Light Control

Quantifies sky glow, light trespass, and glare as environmental impacts. Applies zone-based limits and full-cutoff optics to minimise harm.

Lesson 1 • Control System Architectures

Compares standalone, zoned, and networked control topologies. Selects architecture based on project scale and integration requirements.

Lesson 2 • Dimming Fundamentals and Technologies

Explains phase-cut, 0–10 V, PWM, and digital dimming methods. Matches dimming technology to source type and application.

Lesson 3 • Scene Programming and Tuning

Defines scene creation, preset levels, and transition timing for occupant experience. Addresses commissioning procedures and user interface design.

Lesson 4 • Energy Compliance and Reporting

Applies lighting power density limits and control credit calculations to meet energy codes. Generates compliance documentation for authority review.

Lesson 1 • Wellness Certification Frameworks

Maps lighting requirements within major wellness building rating systems. Guides documentation and measurement for certification compliance.

Lesson 2 • Melanopic Metrics and Standards

Introduces melanopic equivalent daylight illuminance and alpha-opic toolbox metrics. Applies published thresholds to workplace and healthcare design.

Lesson 3 • Application in Healthcare and Education

Applies circadian lighting protocols to patient recovery, staff alertness, and student performance. Addresses specific space constraints and user needs.

Lesson 4 • Tunable White Lighting Systems

Designs dual-channel and multi-channel LED systems for correlated colour temperature tuning. Balances melanopic stimulus with visual comfort across the day.

Lesson 1 • Post-Occupancy Evaluation

Measures occupant satisfaction and energy performance after building occupation. Feeds findings back into future design practice.

Lesson 2 • Lighting Design Documentation

Produces complete construction document sets including plans, schedules, and details. Ensures drawings communicate design intent unambiguously to contractors.

Lesson 3 • Coordinating Lighting with Architecture

Integrates luminaire placement with structural, mechanical, and finish systems. Resolves conflicts through BIM coordination and design review.

Lesson 4 • Budgeting and Value Engineering

Develops lighting budgets and evaluates cost-performance trade-offs. Applies value engineering without compromising design intent or performance.