Home Automation Electrician Training

Lesson 1 • Electrical Safety Principles

Introduces shock hazards, arc flash risks, and lockout/tagout procedures. Safe habits established here apply throughout every hands-on chapter.

Lesson 2 • Basic Electrical Theory

Covers voltage, current, resistance, and power relationships using Ohm's Law. Establishes the physics foundation needed for all subsequent circuit work.

Lesson 3 • Residential Wiring Essentials

Covers wire gauges, insulation types, conduit, and junction box installation. Provides the hands-on wiring baseline required before automation devices are introduced.

Lesson 4 • Reading Electrical Diagrams

Teaches schematic symbols, wiring diagrams, and ladder logic notation. Diagram literacy is prerequisite for installing and troubleshooting automation systems.

Lesson 1 • Sensor and Detector Wiring

Teaches wiring of motion, door/window, temperature, and smoke sensors. Correct termination ensures reliable signal delivery to automation controllers.

Lesson 2 • Low-Voltage Wiring Fundamentals

Distinguishes line-voltage from low-voltage circuits and covers applicable installation rules. Sets the regulatory and technical context for all sensor and control wiring.

Lesson 3 • Control Bus Wiring Basics

Introduces two-wire, RS-485, and DALI bus topologies used in automation. Understanding bus architecture prepares students for controller integration in later chapters.

Lesson 1 • Overview of Automation Protocols

Surveys wired and wireless protocols including Z-Wave, Zigbee, KNX, and Wi-Fi. Protocol selection criteria are established before hands-on configuration begins.

Lesson 2 • KNX and Wired Bus Configuration

Covers KNX topology, group addressing, and ETS software commissioning. Wired bus skills complement wireless knowledge for high-reliability installations.

Lesson 3 • Protocol Bridging and Integration

Explains gateways, protocol translators, and API-based integration methods. Bridging skills enable unified control of mixed-protocol installations.

Lesson 4 • IP Networking for Automation

Covers IP addressing, subnetting, VLANs, and router configuration relevant to smart home networks. Network literacy enables students to integrate IP-based devices reliably.

Lesson 1 • Lighting Scene and Zone Programming

Teaches zone definition, scene programming, and circadian lighting schedules. Scene programming ties together all lighting hardware into a cohesive user experience.

Lesson 2 • Smart Switch and Dimmer Installation

Covers load compatibility, neutral wire requirements, and physical installation of smart switches. Correct installation prevents flicker, overheating, and device failure.

Lesson 3 • Occupancy and Vacancy Sensor Setup

Covers PIR and ultrasonic sensor placement, sensitivity adjustment, and wiring. Proper sensor setup maximises energy savings and user comfort.

Lesson 4 • Smart Bulb and Fixture Integration

Teaches pairing smart bulbs to hubs, setting scenes, and managing colour temperature. Bulb integration builds on protocol knowledge from Chapter 3.

Lesson 1 • HVAC System Fundamentals Review

Reviews heating, cooling, and ventilation system types relevant to automation integration. Establishes the mechanical context needed before wiring thermostats and controllers.

Lesson 2 • Energy Management and Scheduling

Explains geofencing, occupancy-based setbacks, and utility rate scheduling for HVAC. Energy management strategies reduce operating costs while maintaining comfort.

Lesson 3 • HVAC Zoning System Setup

Teaches motorised damper wiring, zone controller configuration, and bypass damper sizing. Zoning delivers independent temperature control to multiple areas of a home.

Lesson 4 • Ventilation and Air Quality Automation

Covers CO2, humidity, and VOC sensor integration with ventilation controls. Automated ventilation maintains indoor air quality without manual intervention.

Lesson 1 • Video Doorbell and Intercom Setup

Explains doorbell transformer sizing, wiring, and app-based intercom configuration. Video doorbells extend perimeter awareness and remote access control.

Lesson 2 • IP Camera and NVR Installation

Covers PoE camera wiring, NVR configuration, and camera placement for coverage. Proper camera installation provides reliable video evidence and live monitoring.

Lesson 3 • System Integration and Monitoring

Teaches linking cameras, locks, and sensors into a unified security dashboard. Integration enables automated responses such as recording on alarm trigger.

Lesson 4 • Residential Alarm Panel Wiring

Covers panel power supply, zone wiring, and tamper protection for residential alarm systems. Proper panel wiring is the backbone of all connected security devices.

Lesson 1 • Solar Inverter and Battery Integration

Explains inverter communication interfaces, battery storage wiring, and grid-tie safety. Solar and storage integration requires coordination with utility interconnection rules.

Lesson 2 • Energy Automation Rules and Reporting

Teaches rule-based automation for energy shifting, peak avoidance, and reporting. Automated energy rules deliver measurable savings without user intervention.

Lesson 3 • EV Charger Installation

Covers Level 2 charger circuit sizing, EVSE wiring, and smart charging configuration. EV charger installation integrates with energy management to minimise grid impact.

Lesson 4 • Whole-Home Energy Monitoring

Covers CT sensor installation, energy monitor wiring, and dashboard configuration. Real-time energy data enables informed automation decisions and cost reduction.

Lesson 1 • Smart Home Hub and Controller Setup

Covers hub selection, network placement, and initial controller configuration. The hub is the integration point for all subsystems installed in previous chapters.

Lesson 2 • System Testing and Fault Diagnosis

Covers end-to-end functional testing, fault isolation, and diagnostic tool use. Systematic testing ensures every subsystem performs to specification before handover.

Lesson 3 • Voice Assistant and App Integration

Explains linking smart home platforms to voice assistants and mobile apps. App and voice integration provides the primary user interface for daily system operation.

Lesson 4 • Cross-Subsystem Automation Rules

Teaches trigger-action rule creation linking lighting, HVAC, security, and energy systems. Cross-subsystem rules deliver the intelligent behaviour that defines a smart home.