LED Panel Installation Course

Lesson 1 • Personal Protective Equipment

Covers selection and proper use of insulated gloves, safety glasses, hard hats, and arc-rated clothing. Directly reduces injury risk during all installation tasks.

Lesson 2 • Worksite Setup and Organisation

Covers tool staging, material handling, ladder safety, and housekeeping standards on active job sites. Reduces trip hazards and improves installation efficiency.

Lesson 3 • Electrical Hazard Recognition

Identifies shock, arc flash, and overload hazards common in distribution board installation environments. Provides the risk-awareness foundation required for all hands-on work.

Lesson 4 • Emergency Response Procedures

Outlines first-aid response to electrical shock, fire, and fall incidents on installation sites. Ensures students can act decisively when accidents occur.

Lesson 1 • Industry Standards and Compliance Basics

Introduces safety certification marks, energy efficiency ratings, and building code compliance concepts. Prepares students to verify product legality before purchase.

Lesson 2 • Colour Quality Metrics

Explains colour temperature, CRI, and colour consistency standards used in commercial and residential settings. Guides product selection for specific lighting quality requirements.

Lesson 3 • Panel Types and Form Factors

Distinguishes edge-lit, back-lit, and direct-lit panels, plus rigid versus flexible formats. Enables accurate product selection based on application requirements.

Lesson 4 • How LED Panels Work

Covers light-emitting diode physics, panel construction layers, and driver circuitry. Establishes the technical baseline needed for all subsequent installation decisions.

Lesson 1 • Measurement and Testing Instruments

Covers multimeters, clamp meters, lux meters, and thermal cameras used during and after installation. Connects instrument use to quality verification in later chapters.

Lesson 2 • Ceiling Structure Assessment

Teaches identification of T-bar grids, drywall, concrete, and wood-frame ceilings and their load limits. Determines mounting method selection for each panel type.

Lesson 3 • Hand and Power Tools for Installation

Identifies drills, screwdrivers, wire strippers, crimpers, and conduit tools used in LED panel work. Builds tool competency required for every subsequent installation task.

Lesson 4 • Site Documentation and Planning

Produces scaled layout drawings, material take-offs, and pre-installation checklists from site data. Feeds directly into the installation planning phase of the course.

Lesson 1 • Making Safe Electrical Connections

Demonstrates wire nut, push-in connector, and terminal block techniques for secure, code-compliant joints. Directly applied during panel wiring in the next chapter.

Lesson 2 • Circuit Load Calculation

Calculates total wattage, amperage, and circuit loading for groups of LED panels. Prevents overloaded circuits and ensures breaker sizing accuracy.

Lesson 3 • Wire Gauge and Type Selection

Matches conductor gauge to current draw and run length using ampacity tables and voltage-drop formulas. Ensures safe, efficient power delivery to every panel.

Lesson 4 • Wiring Topologies for LED Panels

Compares home-run, daisy-chain, and loop wiring configurations for efficiency and fault isolation. Guides topology selection based on project size and maintenance needs.

Lesson 1 • Alignment, Levelling, and Finishing

Uses laser levels, string lines, and trim rings to achieve professional visual alignment across panel arrays. Delivers the finished appearance expected by clients.

Lesson 2 • T-Bar Grid Panel Placement

Teaches lay-in panel alignment, grid support wire installation, and seismic clip requirements. Ensures panels are stable and compliant in suspended ceiling systems.

Lesson 3 • Surface-Mount Panel Installation

Demonstrates back-box mounting, surface conduit routing, and panel attachment to concrete or drywall. Applies to industrial and retrofit environments without ceiling cavities.

Lesson 4 • Recessed Panel Installation

Covers cutout marking, drywall cutting, and clip or spring-mount insertion for recessed LED panels. Builds the most common installation skill used in commercial projects.

Lesson 1 • Occupancy and Daylight Sensors

Installs PIR and ultrasonic occupancy sensors and photocell daylight sensors wired to LED drivers. Enables energy-saving automatic control in occupied spaces.

Lesson 2 • 0–10V Dimming Wiring

Wires 0–10V control leads from dimmer to driver, including polarity, shielding, and maximum wire run limits. Enables smooth analog dimming in commercial installations.

Lesson 3 • LED Driver Types and Selection

Compares constant-current, constant-voltage, and programmable drivers by application and panel compatibility. Ensures correct driver pairing before wiring begins.

Lesson 4 • DALI Protocol Integration

Configures DALI bus wiring, addresses individual drivers, and groups fixtures using a commissioning tool. Supports advanced scene and zone control in large installations.

Lesson 1 • Pre-Energisation Safety Checks

Verifies insulation resistance, ground continuity, and correct polarity before applying power to the system. Prevents equipment damage and shock hazards at first energisation.

Lesson 2 • Thermal and Electrical Diagnostics

Uses thermal cameras and clamp meters to detect hot drivers, overloaded conductors, and loose connections. Identifies latent defects before handover to the client.

Lesson 3 • Dimming and Control Verification

Tests full dimming range, scene recall, sensor response, and control system communication integrity. Validates that all control features operate as programmed.

Lesson 4 • Commissioning Documentation

Compiles test results, as-built drawings, control settings, and warranty records into a handover package. Provides the client with a complete record of the installed system.

Lesson 1 • Common Failure Modes and Fixes

Identifies driver failure, LED array degradation, loose connections, and control wiring faults with repair steps. Enables rapid resolution of the most frequent field problems.

Lesson 2 • Preventive Maintenance Schedules

Establishes cleaning intervals, driver inspection cycles, and connection re-torque schedules for LED systems. Reduces unplanned failures and extends panel service life.

Lesson 3 • Systematic Fault Diagnosis

Applies a structured diagnostic process to flickering, non-starting, and partial-output failures. Builds efficient troubleshooting skills applicable to any LED panel system.

Lesson 4 • Planning System Upgrades

Evaluates existing infrastructure for compatibility with higher-efficiency panels, smart controls, and expanded zones. Produces an upgrade proposal aligned with client goals.