Construction Technology in Civil Engineering Course

Lesson 1 • Construction Project Lifecycle Overview

Maps the full project lifecycle from feasibility to closeout. Provides context for where each technology and technique fits within a project.

Lesson 2 • Civil Engineering Scope and Disciplines

Defines civil engineering branches and their interdependencies. Grounds students in the breadth of the field before focusing on construction technology.

Lesson 3 • Key Stakeholders and Their Roles

Identifies owners, engineers, contractors, and regulators. Clarifies decision-making authority and communication flows on a construction project.

Lesson 4 • Reading Construction Drawings and Specifications

Teaches interpretation of plans, sections, and technical specifications. Enables students to extract dimensional, material, and procedural data from documents.

Lesson 1 • Geotechnical Report Interpretation

Teaches how to read and apply geotechnical investigation reports. Students extract design parameters and identify geohazards from professional reports.

Lesson 2 • Laboratory Testing of Soil Samples

Details common lab tests and their engineering significance. Links test results to design parameters used in foundation and earthwork engineering.

Lesson 3 • Site Investigation Methods

Explains borehole drilling, sampling, and in-situ testing techniques. Equips students to plan and interpret a geotechnical investigation program.

Lesson 4 • Groundwater Assessment and Control

Addresses groundwater detection, piezometric levels, and dewatering strategies. Prepares students to manage water-related risks during excavation and foundation work.

Lesson 1 • Compaction Techniques and Equipment

Details compaction theory, equipment types, and lift thickness requirements. Connects compaction effort to density and strength outcomes in fill layers.

Lesson 2 • Earthwork Planning and Mass Haul

Covers cut-and-fill volume calculation and mass haul optimization. Reduces material transport costs through efficient earthwork sequencing.

Lesson 3 • Excavation Methods and Equipment

Surveys open excavation, trenching, and rock-breaking techniques. Matches equipment selection to soil type, depth, and site constraints.

Lesson 4 • Earthwork Quality Control and Testing

Covers field density testing and acceptance criteria for compacted fills. Ensures students can implement and document earthwork quality assurance programs.

Lesson 1 • Ground Improvement Techniques

Covers preloading, stone columns, grouting, and soil mixing to improve weak ground. Provides alternatives to deep foundations when soil conditions are marginal.

Lesson 2 • Pile Foundation Systems

Surveys driven, bored, and micro-pile types and their load transfer mechanisms. Prepares students to specify pile types based on load and subsurface conditions.

Lesson 3 • Pile Installation and Equipment

Details driving rigs, auger equipment, and concrete placement for bored piles. Enables students to supervise pile installation and identify common defects.

Lesson 4 • Shallow Foundation Types and Design

Examines spread footings, mats, and strip foundations and their bearing capacity limits. Connects foundation geometry to load distribution and settlement control.

Lesson 1 • Formwork and Falsework Systems

Covers timber, steel, and proprietary formwork systems and their load calculations. Ensures safe, accurate concrete forming and efficient stripping sequences.

Lesson 2 • Reinforcement Detailing and Placement

Addresses rebar scheduling, bending, and placement tolerances for structural concrete. Connects reinforcement layout to structural performance and code compliance.

Lesson 3 • Concrete Testing and Quality Assurance

Covers fresh and hardened concrete tests and acceptance criteria. Enables students to implement a robust quality assurance program on structural concrete pours.

Lesson 4 • Concrete Mix Design Principles

Explains water-cement ratio, aggregate grading, and admixture roles in mix design. Enables students to develop mixes that balance strength, workability, and durability.

Lesson 1 • Composite Steel-Concrete Floor Systems

Explains shear stud design, metal deck installation, and composite beam behavior. Enables students to supervise composite floor construction and verify stud placement.

Lesson 2 • Steel Sections, Properties, and Grades

Introduces structural steel section types, material grades, and mechanical properties. Provides the material knowledge base for selecting and specifying structural steel.

Lesson 3 • Bolted and Welded Connections

Details high-strength bolt installation, torque verification, and field welding inspection. Validates connection integrity to ensure structural load transfer.

Lesson 4 • Steel Erection Methods and Equipment

Covers crane selection, lifting plans, and erection sequencing for steel frames. Ensures safe and efficient assembly of structural steel on-site.

Lesson 1 • Bridge Construction Methods

Surveys cast-in-place, precast, and incremental launch bridge construction methods. Prepares students to manage bridge erection sequences and temporary works.

Lesson 2 • Subgrade Preparation and Base Layers

Addresses subgrade stabilization, sub-base, and base course construction methods. Ensures a stable, well-drained platform for pavement layers.

Lesson 3 • Road Geometry and Alignment Design

Covers horizontal and vertical alignment principles and cross-section elements. Connects geometric design to driver safety, drainage, and construction feasibility.

Lesson 4 • Asphalt Pavement Construction

Details asphalt mix types, paving equipment operation, and compaction requirements. Produces smooth, durable asphalt surfaces meeting density and smoothness standards.

Lesson 1 • Construction Scheduling and Progress Control

Teaches critical path method, schedule baseline, and progress monitoring techniques. Enables students to detect delays early and implement corrective actions.

Lesson 2 • Cost Control and Change Management

Addresses budget tracking, cost forecasting, and variation order management. Maintains project financial performance through disciplined cost control practices.

Lesson 3 • Environmental Compliance on Construction Sites

Covers erosion control, waste management, and noise and dust mitigation requirements. Ensures construction activities meet environmental protection obligations.

Lesson 4 • Quality Management Systems on Site

Establishes QA/QC plan structure, inspection hold points, and non-conformance management. Embeds quality control into daily construction workflows.