Dedika is a platform where you learn by doing—whether that's creating a business proposal, becoming a manicurist, or mastering a new tool. No matter your goal, the best content on the subject already exists. But it's often in another language, expensive, scattered across the internet, lacking hands-on activities, or part of a course that's too long for a busy schedule. That's why Dedika has its own approach: we find the best materials wherever they are, organize what makes sense for your goals, review everything with experts who are available to answer your questions, and create practical exercises so you can learn by doing. You are the most important part of your journey, and no one knows it better than you. Choose the content and course length, decide if you want to learn online or offline, and pick your preferred format—video, text, audio, or summary. Learn your way, with only what matters to you. Here, every moment you dedicate counts for more, and you reach what matters faster.

Our courses include a summary at the end of each chapter, from which you can download a PDF and print it.

More than 2 million students worldwide

Present in more than 180 countries

Certificate valid in your country

Home Page

...

Metalworking Quality Control Course

All courses

Engineering, Construction and Technology

Welding and Turning

Metalworking Quality Control Course

For all levels

Metalworking Quality Control Course

Name: Metalworking Quality Control Course
Price: 222 USD

Master every layer of metalworking quality control, from hand measurement tools and NDT methods to statistical process control and supplier auditing. This course gives you the practical skills to catch defects early, reduce scrap, and keep production running to spec. Whether you work on the shop floor or manage a QC program, you'll finish ready to deliver measurable results.

Dedika for businesses

What you will learn:

This course covers the full scope of metalworking quality control, starting with measurement systems, metrology, and GD&T, then moving into visual inspection, surface defect identification, and all major NDT methods including ultrasonic, magnetic particle, liquid penetrant, and radiographic testing. You will learn to build and interpret control charts, run process capability studies, and conduct root cause investigations using structured tools like FMEA and 5-Why analysis. Supplier qualification, incoming material inspection, and audit techniques are covered in depth. The course also addresses quality management systems, lean principles, and continuous improvement frameworks. By the end, you will have the knowledge to manage a complete QC program in a metalworking environment.

How you study in practice Metalworking Quality Control Course

How you practice Metalworking Quality Control Course

For companies that want to train their team

With Dedika for Business, the course includes exercises and examples tailored to your own business and the way your company needs.

Click here

Course content

8 Chapters • 41 LessonsDuration between 4 and 360 hours (you decide)

Chapter 1See details

Foundations of Metalworking Quality Control

Lesson 1 • Overview of Common Metalworking Processes
Surveys casting, forging, machining, welding, and forming as QC inspection contexts. Provides process awareness needed to interpret defects in later chapters.
Lesson 2 • What Is Metalworking Quality Control
Defines quality control and distinguishes it from quality assurance in metal fabrication. Anchors the chapter by framing QC as a systematic, measurable discipline.
Lesson 3 • Key Metal Properties and Their Relevance
Covers mechanical, physical, and chemical properties that QC monitors. Connects material behavior to inspection criteria used throughout the course.
Lesson 4 • The Quality Control Workflow
Maps the end-to-end QC process from incoming material to final product release. Establishes the inspection checkpoints revisited in every subsequent chapter.
Lesson 5 • Regulatory and Standards Landscape
Introduces international standards bodies and industry-specific quality frameworks. Students understand compliance obligations without referencing jurisdiction-specific codes.

Chapter 2See details

Measurement Systems and Metrology

Lesson 1 • Geometric Dimensioning and Tolerancing Basics
Introduces GD&T symbols, datums, and tolerance zones as the language of engineering drawings. Enables students to interpret specifications before measuring parts.
Lesson 2 • Hand Measurement Tools
Covers calipers, micrometers, height gauges, and dial indicators for shop-floor use. Students practice correct technique to minimize operator-induced error.
Lesson 3 • Fundamentals of Metrology
Explains measurement units, traceability, and uncertainty concepts central to reliable QC data. Grounds all subsequent instrument use in scientific measurement principles.
Lesson 4 • Coordinate Measuring Machines
Explains CMM types, probe systems, and measurement routines for complex geometries. Bridges manual measurement skills to automated dimensional verification.
Lesson 5 • Gauge Repeatability and Reproducibility
Teaches Gauge R&R studies to quantify measurement system variation. Students determine whether a measurement system is capable before relying on its data.

Chapter 3See details

Visual and Surface Inspection Techniques

Lesson 1 • Weld Visual Inspection
Applies visual inspection criteria specifically to weld beads, heat-affected zones, and joint geometry. Prepares students for the non-destructive testing chapter that follows.
Lesson 2 • Principles of Visual Inspection
Establishes lighting, magnification, and ergonomic standards for reliable visual examination. Reduces subjectivity by applying structured inspection protocols.
Lesson 3 • Coating and Plating Inspection
Addresses thickness measurement, adhesion testing, and visual evaluation of protective coatings. Ensures coating quality meets corrosion and wear protection specifications.
Lesson 4 • Common Surface Defects in Metal Parts
Catalogs cracks, porosity, laps, seams, and surface inclusions with their root causes. Provides the defect vocabulary used in inspection reports and corrective actions.
Lesson 5 • Surface Roughness Measurement
Covers Ra, Rz, and other roughness parameters measured by contact profilometers and optical methods. Links surface finish specifications to functional performance requirements.

Chapter 4See details

Non-Destructive Testing Methods

Lesson 1 • Liquid Penetrant Testing
Covers penetrant application, dwell time, developer use, and indication interpretation for surface-open flaws. Students perform and document a complete PT procedure.
Lesson 2 • Ultrasonic Testing
Teaches pulse-echo and through-transmission UT for volumetric flaw detection and thickness measurement. Students calibrate equipment and interpret A-scan displays.
Lesson 3 • Magnetic Particle Testing
Explains magnetization techniques, particle application, and indication evaluation for ferromagnetic parts. Builds on PT knowledge by extending detection to near-surface flaws.
Lesson 4 • Eddy Current Testing
Covers eddy current principles for surface and near-surface flaw detection in conductive metals. Demonstrates probe selection and signal interpretation for common applications.
Lesson 5 • Radiographic Testing Fundamentals
Introduces X-ray and gamma-ray imaging for internal defect detection in castings and welds. Emphasizes radiation safety protocols alongside image interpretation skills.
Lesson 6 • Introduction to NDT Selection
Frames NDT method selection based on flaw type, material, geometry, and cost. Prevents misapplication of techniques covered in subsequent sections.

Chapter 5See details

Statistical Process Control in Metalworking

Lesson 1 • Control Chart Construction and Use
Teaches X-bar, R, and individuals charts for variable data from machining and forming processes. Students plot, interpret, and respond to out-of-control signals.
Lesson 2 • Attribute Control Charts
Covers p, np, c, and u charts for defect and defective counts in high-volume metalworking. Extends SPC skills to inspection data that cannot be measured continuously.
Lesson 3 • Sampling Plans and Acceptance Sampling
Introduces single, double, and sequential sampling plans for lot acceptance decisions. Connects sampling risk to AQL and LTPD concepts used in supplier and final inspection.
Lesson 4 • Statistical Foundations for QC
Reviews descriptive statistics, normal distribution, and probability concepts essential for SPC. Ensures all students share the mathematical baseline needed for control charting.
Lesson 5 • Process Capability Analysis
Explains Cp, Cpk, Pp, and Ppk indices to quantify how well a process meets specifications. Students calculate indices and recommend improvement actions based on results.

Chapter 6See details

Defect Analysis and Root Cause Investigation

Lesson 1 • Root Cause Analysis Tools
Teaches fishbone diagrams, 5-Why analysis, and fault tree analysis for defect investigation. Students select and apply the appropriate tool based on problem complexity.
Lesson 2 • Failure Mode and Effects Analysis
Covers FMEA structure, severity-occurrence-detection scoring, and risk priority number calculation. Proactively identifies high-risk process steps before defects occur in production.
Lesson 3 • Metallurgical Failure Analysis
Introduces fractography, microstructural examination, and hardness mapping to diagnose material failures. Bridges QC inspection findings to engineering-level root cause evidence.
Lesson 4 • Corrective and Preventive Action Systems
Explains the CAPA cycle, effectiveness verification, and lessons-learned integration into process controls. Closes the defect investigation loop and prevents systemic recurrence.
Lesson 5 • Non-Conformance Classification and Reporting
Defines critical, major, and minor non-conformances and establishes reporting workflows. Accurate classification drives appropriate urgency and resource allocation for investigation.

Chapter 7See details

Supplier Quality Management

Lesson 1 • Supplier Performance Monitoring
Establishes KPIs, scorecards, and escalation processes for ongoing supplier quality tracking. Converts audit and inspection data into actionable supplier development decisions.
Lesson 2 • Incoming Material Inspection
Defines inspection levels, sampling plans, and acceptance criteria for purchased metal stock and components. Prevents non-conforming material from entering the production process.
Lesson 3 • Supplier Selection and Qualification
Covers capability surveys, sample approval processes, and qualification criteria for metal suppliers. Ensures only capable suppliers enter the approved supplier list.
Lesson 4 • Collaborative Supplier Development
Covers joint problem-solving, process improvement support, and technology transfer to elevate supplier capability. Shifts the supplier relationship from policing to partnership.
Lesson 5 • Supplier Auditing Techniques
Teaches audit planning, checklist development, on-site execution, and finding classification. Students conduct a simulated supplier audit and write a formal audit report.

Chapter 8See details

Quality Management Systems and Continuous Improvement

Lesson 1 • Lean Principles Applied to Quality
Applies value stream mapping, waste elimination, and error-proofing to reduce quality losses. Connects lean manufacturing concepts to defect prevention in metalworking.
Lesson 2 • Control Plans and Process Documentation
Teaches control plan development linking process steps, inspection methods, and reaction plans. Formalizes the in-process QC knowledge built throughout the course.
Lesson 3 • Six Sigma DMAIC in Metalworking
Applies the Define-Measure-Analyze-Improve-Control roadmap to chronic metalworking quality problems. Students complete a condensed DMAIC project using data from earlier chapters.
Lesson 4 • Quality Culture and Performance Review
Addresses management review, quality metrics dashboards, and building a quality-first culture. Ensures QMS improvements are sustained through leadership engagement and accountability.
Lesson 5 • Quality Management System Architecture
Maps the process-based QMS model, including policy, objectives, procedures, and records. Provides the organizational framework that connects all prior course topics.

Certification

Your valid completion certificate

This course is for you:

Machinist: wants to move from making parts to inspecting them.
QC technician: ready to formalize hands-on experience with structured methodology.
Manufacturing engineer: needs deeper fluency in defect analysis and process control.
Welding inspector: looking to expand credentials beyond visual examination alone.
Career changer: entering metalworking quality from a general manufacturing background.
Production supervisor: aiming to lead quality initiatives across an entire shop floor.

What our students say

Your classes are perfect. I purchased the one-year package and finally have the opportunity to follow various topics of my interest without needing to switch platforms... I thank you for everything you do, I've already recommended you to other people...