Fire Protection Training

Lesson 1 • Flammability and Explosive Limits

Defines lower and upper flammable limits for common gases and vapors. Enables safe assessment of ignition risk in hazardous atmospheres.

Lesson 2 • The Fire Tetrahedron Model

Introduces the four components required to sustain fire. Links each component to practical suppression strategies used throughout the course.

Lesson 3 • Heat Transfer Mechanisms

Explains conduction, convection, and radiation as pathways for fire spread. Connects heat transfer principles to building fire dynamics.

Lesson 4 • Stages of Fire Development

Describes incipient, growth, fully developed, and decay phases. Prepares students to recognize fire stage indicators during operations.

Lesson 1 • Compartment Fire Dynamics

Examines how enclosure size and openings control heat accumulation. Builds on combustion chemistry to explain confined-space fire behavior.

Lesson 2 • Ventilation-Controlled Fire Behavior

Analyzes how opening doors and windows alters fire intensity and direction. Prepares students to coordinate ventilation with suppression tactics.

Lesson 3 • Flashover Recognition and Prevention

Identifies thermal and visual indicators preceding flashover. Equips students to take early action to prevent total room involvement.

Lesson 4 • Building Construction and Fire Spread

Evaluates how construction type affects structural integrity and fire travel. Informs size-up decisions and collapse risk assessment.

Lesson 1 • Principles of Fire Prevention

Establishes the hierarchy of prevention, protection, and response. Frames proactive hazard elimination as the primary risk-reduction strategy.

Lesson 2 • Regulatory Compliance and Code Enforcement

Explains the role of fire codes, standards, and enforcement authority. Prepares students to apply regulatory requirements during inspections and plan reviews.

Lesson 3 • Fire Risk Assessment Methods

Introduces qualitative and quantitative risk assessment frameworks. Enables prioritization of mitigation measures based on likelihood and consequence.

Lesson 4 • Occupancy Hazard Classification

Categorizes occupancies by fuel load, occupant vulnerability, and use type. Guides inspection priorities and resource allocation decisions.

Lesson 1 • Special Detection Applications

Addresses flame detectors, gas detectors, and video analytics for unique hazards. Expands detection knowledge beyond standard smoke and heat technologies.

Lesson 2 • Fire Alarm Control Panel Functions

Explains initiating devices, notification appliances, and panel logic. Connects system architecture to reliable alarm initiation and occupant notification.

Lesson 3 • Notification Appliances and Evacuation Signals

Covers audible, visual, and voice notification requirements. Ensures students can evaluate system adequacy for occupant alerting.

Lesson 4 • Smoke and Heat Detector Technologies

Compares ionization, photoelectric, and thermal detection principles. Guides technology selection based on fire type and occupancy characteristics.

Lesson 1 • Automatic Sprinkler System Fundamentals

Explains wet, dry, pre-action, and deluge sprinkler configurations. Establishes the hydraulic and operational basis for all sprinkler system types.

Lesson 2 • Special Hazard Suppression Agents

Compares foam, clean agent, dry chemical, and CO2 systems for specific hazards. Guides agent selection based on fuel type and environmental constraints.

Lesson 3 • Suppression System Inspection and Testing

Details inspection frequencies, flow tests, and impairment procedures for suppression systems. Ensures students can verify operational readiness and manage out-of-service conditions.

Lesson 4 • Hydraulic Design and Water Supply

Covers demand calculations, pipe sizing, and water supply adequacy. Connects hydraulic principles to reliable system performance under fire conditions.

Lesson 1 • Specialized PPE for Hazardous Environments

Addresses proximity suits, chemical protective clothing, and wildland gear. Extends PPE knowledge to non-structural fire and hazmat scenarios.

Lesson 2 • Firefighter Safety and Accountability Systems

Introduces personnel accountability, PASS devices, and rapid intervention. Connects individual safety practices to crew-level survival strategies.

Lesson 3 • PPE Maintenance and Decontamination

Details cleaning, inspection, and retirement criteria for protective gear. Reduces carcinogen exposure risk through proper post-incident decontamination.

Lesson 4 • Self-Contained Breathing Apparatus

Explains SCBA components, air management, and emergency procedures. Builds proficiency in SCBA use as the primary respiratory protection tool.

Lesson 1 • Offensive and Defensive Attack Strategies

Distinguishes interior offensive tactics from exterior defensive operations. Guides mode selection based on fire conditions, resources, and life safety factors.

Lesson 2 • Overhaul and Fire Investigation Preservation

Covers systematic overhaul to extinguish hidden fire and preserve evidence. Connects suppression completion to origin-and-cause investigation requirements.

Lesson 3 • Ventilation Coordination with Suppression

Applies flow path theory to coordinate ventilation timing with hose line placement. Prevents unintended fire spread caused by poorly timed ventilation.

Lesson 4 • Hose Handling and Water Application

Covers hose selection, nozzle types, and effective stream application techniques. Builds the manual skills required for interior and exterior attack operations.

Lesson 5 • Search, Rescue, and Victim Removal

Describes primary and secondary search patterns and victim removal methods. Integrates rescue priorities with suppression operations for coordinated response.

Lesson 1 • Incident Documentation and After-Action Review

Details required incident records, cost tracking, and after-action review processes. Builds organizational learning through systematic post-incident analysis.

Lesson 2 • Incident Command System Structure

Introduces ICS organizational components, span of control, and unity of command. Establishes the management framework used throughout all operational chapters.

Lesson 3 • Incident Action Planning

Explains the planning cycle, tactical objectives, and resource assignment. Connects strategic goals to operational tasks through a written action plan.

Lesson 4 • Multi-Agency Coordination and Unified Command

Addresses unified command structure for multi-jurisdictional incidents. Prepares students to integrate external agencies into a cohesive command structure.