Building Maintenance Technician Course

Lesson 1 • Tools and Equipment Orientation

Introduces hand tools, power tools, and measuring instruments used in daily maintenance tasks. Proper selection and care prevent injury and equipment damage.

Lesson 2 • Reading Blueprints and Work Orders

Teaches interpretation of floor plans, schematics, and written work orders. These skills are prerequisites for all system-specific chapters.

Lesson 3 • Workplace Safety Fundamentals

Covers hazard recognition, personal protective equipment, and emergency response basics. Safety principles apply across every chapter in this course.

Lesson 4 • Preventive Maintenance Concepts

Introduces scheduled maintenance philosophy, inspection cycles, and record-keeping. Preventive practices reduce costs and extend equipment life.

Lesson 1 • Leak Detection and Repair

Teaches pressure testing, visual inspection, and acoustic detection to locate leaks. Repair techniques address both supply and drain line failures.

Lesson 2 • Water Heater Maintenance

Covers tank and tankless water heater inspection, anode rod service, and thermostat adjustment. Regular service extends heater life and maintains safe water temperature.

Lesson 3 • Fixture Repair and Replacement

Addresses faucet, toilet, and sink maintenance including cartridge, seat, and flapper replacement. Proper fixture function conserves water and prevents damage.

Lesson 4 • Pipe Materials and Joining Methods

Covers copper, PVC, CPVC, PEX, and cast-iron pipe properties and connection techniques. Correct material selection prevents leaks and code violations.

Lesson 1 • Panels, Breakers, and Wiring

Explains panel layout, breaker sizing, and wire gauge selection for common circuits. Correct identification prevents overloads and fire hazards.

Lesson 2 • Electrical Safety and Fundamentals

Reviews voltage, current, resistance, and circuit types alongside shock prevention protocols. Safety rules established here govern all electrical work in this course.

Lesson 3 • Electrical Troubleshooting Methods

Applies systematic fault-finding using multimeters, circuit tracers, and visual inspection. Logical diagnosis reduces downtime and avoids unnecessary part replacement.

Lesson 4 • Outlet, Switch, and Fixture Repair

Covers replacement of receptacles, switches, and light fixtures using proper wiring methods. These are the most frequent electrical tasks in building maintenance.

Lesson 1 • Air Filtration and Ventilation

Covers filter ratings, replacement schedules, and ventilation rate requirements for indoor air quality. Proper filtration protects equipment and occupant health.

Lesson 2 • Thermostat and Controls Service

Teaches thermostat calibration, wiring verification, and programmable control setup. Accurate controls reduce energy waste and occupant complaints.

Lesson 3 • HVAC System Types and Components

Surveys split systems, packaged units, heat pumps, and hydronic systems and their key components. System identification is the foundation for all HVAC service tasks.

Lesson 4 • Heating System Maintenance

Addresses furnace, boiler, and heat pump heating mode inspection and tune-up procedures. Seasonal maintenance prevents failures during peak demand periods.

Lesson 1 • Insulation and Air Sealing

Introduces insulation types, R-value concepts, and air sealing methods for attics and crawl spaces. Effective insulation directly reduces heating and cooling costs.

Lesson 2 • Door Systems Maintenance

Teaches adjustment, hardware lubrication, and threshold replacement for interior and exterior doors. Functional doors ensure security, accessibility, and energy efficiency.

Lesson 3 • Roof Inspection and Minor Repairs

Covers flat and pitched roof inspection, flashing assessment, and minor patching techniques. Early detection of roof defects prevents costly interior damage.

Lesson 4 • Window and Glazing Maintenance

Covers weatherstripping, glazing compound, hardware adjustment, and glass replacement basics. Properly sealed windows reduce energy consumption and drafts.

Lesson 1 • Ceiling and Acoustic Tile Maintenance

Covers suspended grid inspection, tile replacement, and water stain remediation. Ceiling condition directly affects occupant perception of building quality.

Lesson 2 • Drywall Repair Techniques

Covers patching holes, replacing damaged sections, taping, mudding, and texturing to match existing finishes. Quality drywall repair is among the most requested maintenance tasks.

Lesson 3 • Painting and Surface Preparation

Addresses surface cleaning, priming, and paint application for walls, ceilings, and trim. Proper preparation determines the durability and appearance of the finish coat.

Lesson 4 • Flooring Repair and Replacement

Teaches repair of tile, vinyl, laminate, and carpet including subfloor assessment. Flooring integrity affects safety, appearance, and moisture control.

Lesson 1 • Elevator and Conveying System Basics

Covers technician-level inspection tasks, log review, and coordination with licensed elevator contractors. Technicians identify issues but defer major repairs to licensed specialists.

Lesson 2 • Fire Suppression System Inspection

Covers sprinkler head inspection, control valve checks, and fire extinguisher maintenance per safety standards. Functional suppression systems are legally required in most facilities.

Lesson 3 • Access Control and Security Systems

Introduces card reader maintenance, door strike testing, camera inspection, and intercom checks. Functional access control protects occupants and building assets.

Lesson 4 • Emergency and Exit Lighting

Covers monthly and annual testing of emergency luminaires, exit signs, and battery backup systems. Reliable egress lighting is mandatory for occupant safety during power failures.

Lesson 1 • Condition-Based and Predictive Maintenance

Introduces vibration analysis, thermal imaging, and oil analysis as predictive tools. These methods detect failures before breakdown, reducing unplanned downtime.

Lesson 2 • Regulatory Compliance and Inspections

Covers preparation for authority inspections, documentation requirements, and corrective action tracking. Compliance protects occupants and shields the organisation from liability.

Lesson 3 • Computerised Maintenance Management Systems

Teaches work order creation, asset tracking, and PM scheduling within a CMMS platform. Digital records improve accountability and support data-driven decisions.

Lesson 4 • Maintenance Budgeting Basics

Covers labour, material, and contractor cost estimation for routine and capital maintenance. Budget awareness helps technicians prioritise work and justify expenditures.