Electrical Awareness Course

Lesson 1 • Voltage, Current, and Resistance

Defines the three fundamental electrical quantities and their relationships. Connects measurable quantities to real-world circuit behaviour.

Lesson 2 • Direct and Alternating Current

Distinguishes DC from AC, covering waveforms, frequency, and typical applications of each. Sets the stage for understanding workplace electrical systems.

Lesson 3 • Nature and Properties of Electricity

Covers atomic structure, electron flow, and the origin of electrical charge. Provides the conceptual foundation for understanding all subsequent electrical principles.

Lesson 1 • Series and Parallel Circuits

Analyses how components behave when connected in series versus parallel configurations. Reinforces Ohm's Law application across different circuit topologies.

Lesson 2 • Transformers and Power Distribution Components

Explains transformer operation and the components used to distribute power across a facility. Prepares students to recognise distribution equipment in their work environment.

Lesson 3 • Switches, Relays, and Protective Devices

Examines control and protection components including fuses, circuit breakers, and relays. Connects component knowledge to safe circuit operation and fault protection.

Lesson 4 • Passive Electrical Components

Covers resistors, capacitors, and inductors, including their functions and circuit effects. Builds component recognition skills needed for equipment inspection.

Lesson 1 • Hazard Recognition and Risk Assessment

Introduces systematic methods for identifying and evaluating electrical risks before starting work. Connects hazard knowledge to structured pre-task assessment practices.

Lesson 2 • Electrical Fire Hazards

Covers how electrical faults ignite fires and the unique challenges of extinguishing them. Links hazard awareness to fire prevention and emergency response.

Lesson 3 • Arc Flash and Arc Blast Hazards

Explains the causes, energy release, and injury potential of arc flash events. Prepares students to recognise arc flash risk conditions before approaching equipment.

Lesson 4 • Common Electrical Hazards

Catalogues workplace hazards such as exposed conductors, overloaded circuits, and damaged insulation. Enables hazard recognition during routine work activities.

Lesson 1 • Incident Reporting and Investigation

Covers regulatory requirements for reporting electrical incidents and the investigation process. Prepares students to fulfil reporting obligations and support root-cause analysis.

Lesson 2 • Electrical Safety Programmes

Outlines the components of a compliant workplace electrical safety programme. Connects regulatory requirements to practical programme implementation.

Lesson 3 • Electrical Installation Standards

Covers wiring, earthing, and installation requirements specified by recognised electrical codes. Enables students to identify non-compliant installations in their workplace.

Lesson 4 • Regulatory Framework Overview

Surveys the hierarchy of electrical safety regulations, from national standards to employer obligations. Establishes the legal and ethical context for all safety practices.

Lesson 1 • Lockout/Tagout Auditing and Retraining

Covers periodic auditing of energy control procedures and triggers for retraining. Ensures ongoing compliance and procedural accuracy over time.

Lesson 2 • Lockout/Tagout Procedure Steps

Provides a step-by-step walkthrough of the full lockout/tagout sequence from notification to release. Builds procedural competency through structured sequence practice.

Lesson 3 • Energy Control Programme Principles

Introduces the purpose, scope, and key elements of an energy control programme. Establishes the regulatory and safety rationale for lockout/tagout procedures.

Lesson 4 • Group Lockout and Complex Isolation

Addresses multi-worker and multi-energy-source scenarios requiring coordinated isolation. Prepares students for real-world situations involving shared equipment or complex systems.

Lesson 1 • Additional Electrical PPE

Covers supplementary protective items including safety glasses, hard hats, and insulated footwear. Completes the full PPE ensemble required for electrical work.

Lesson 2 • Arc Flash Protective Clothing

Details arc-rated fabric types, arc thermal performance values, and layering principles. Prepares students to assemble compliant arc flash ensembles for their work tasks.

Lesson 3 • PPE Selection Based on Hazard Level

Explains how to match PPE to shock and arc flash hazard categories using risk assessment results. Connects hazard identification skills from prior chapters to equipment selection.

Lesson 4 • PPE Inspection, Maintenance, and Retirement

Establishes inspection schedules, storage conditions, and criteria for retiring damaged PPE. Ensures PPE remains reliable throughout its service life.

Lesson 1 • Working on Energised Equipment

Covers the justification requirements, permits, and precautions for energised electrical work. Ensures students understand that energised work is a last resort requiring strict controls.

Lesson 2 • Housekeeping and Environmental Controls

Addresses workspace organisation, moisture control, and clearance requirements around electrical equipment. Prevents environmental conditions from creating or worsening electrical hazards.

Lesson 3 • Establishing an Electrically Safe Work Condition

Details the full process of creating a verified de-energised work environment. Reinforces lockout/tagout skills within the broader context of safe work planning.

Lesson 4 • Approach Boundaries and Safe Distances

Defines limited, restricted, and prohibited approach boundaries for shock and arc flash. Enables students to position themselves and others safely near energised equipment.

Lesson 1 • Cardiopulmonary Resuscitation for Electrical Victims

Covers CPR technique adapted for electrical injury victims, including cardiac arrest recognition. Prepares students to sustain a victim until professional medical help arrives.

Lesson 2 • Responding to Electrical Fires

Covers safe response procedures for electrical fires, including extinguisher selection and evacuation. Ensures students can act effectively without creating additional electrical hazards.

Lesson 3 • Burn Treatment and First Aid

Details first aid for electrical contact burns, arc flash burns, and secondary thermal injuries. Connects injury type knowledge to appropriate immediate treatment actions.

Lesson 4 • Responding to Electrical Shock Victims

Provides a step-by-step response sequence for assisting a person who has received an electric shock. Emphasises rescuer safety before victim contact to prevent secondary casualties.