Electric Pallet Jack Training

Lesson 1 • Power Systems and Battery Basics

Explains lead-acid and lithium-ion battery technologies and their operational differences. Operators gain awareness of power management as a foundation for charging procedures.

Lesson 2 • Types and Industrial Applications

Covers rider, walkie, and reach variants and their specific use cases. Connects equipment selection to operational efficiency in distribution and manufacturing environments.

Lesson 3 • Regulatory Framework Overview

Introduces powered industrial truck safety regulations and employer training obligations. Operators understand compliance requirements before beginning hands-on equipment operation.

Lesson 1 • Inspection Checklist Fundamentals

Introduces the structured pre-shift inspection process and its regulatory basis. Operators learn why each checklist item exists and how it prevents equipment failure.

Lesson 2 • Electrical and Battery Inspection

Teaches inspection of battery connections, cables, electrolyte levels, and charge status. Electrical defects are the leading cause of unexpected shutdowns and fire hazards.

Lesson 3 • Removal from Service Decisions

Establishes criteria for tagging out defective equipment and reporting to supervisors. Operators practise judgement calls using real-world defect scenarios.

Lesson 4 • Mechanical and Structural Checks

Covers fork condition, frame integrity, wheels, and hydraulic system visual inspection. Defects found here directly affect load stability and operator safety.

Lesson 1 • Energy Conservation During Operation

Identifies driving habits and load practices that reduce unnecessary power draw. Operators apply conservation techniques to maximise runtime and reduce charging frequency.

Lesson 2 • Connecting and Disconnecting Batteries

Teaches correct connector alignment, sequencing, and torque to prevent arcing and damage. Proper technique is essential before any charging or battery swap operation.

Lesson 3 • Battery Watering and Maintenance

Details distilled water addition intervals, fill levels, and post-charge watering sequence for lead-acid batteries. Correct maintenance prevents sulphation and premature capacity loss.

Lesson 4 • Charging Cycles and Opportunity Charging

Explains full charge cycles, partial opportunity charging, and their effects on battery longevity. Operators match charging strategy to shift schedules and workload demands.

Lesson 1 • Stopping and Emergency Procedures

Covers controlled braking, emergency stop activation, and post-stop equipment positioning. Operators respond correctly to unexpected obstacles and equipment malfunctions.

Lesson 2 • Turning and Manoeuvring Techniques

Teaches wide-arc turns, pivot turns, and navigating narrow aisles safely. Operators learn how rear-wheel steering affects turning radius and pedestrian clearance.

Lesson 3 • Tiller Arm and Speed Control Mastery

Introduces tiller arm grip, throttle sensitivity, and speed zone settings. Correct tiller technique is the foundation of all subsequent manoeuvring skills.

Lesson 4 • Forward and Reverse Travel

Covers directional control, body positioning, and awareness of fork orientation during travel. Operators practise smooth starts and stops to prevent load shifting.

Lesson 1 • Understanding Load Capacity and Ratings

Explains nameplate capacity, load centre distance, and how elevated loads reduce rated capacity. Operators calculate safe load limits before attempting any lift.

Lesson 2 • Handling Unusual and Oversized Loads

Addresses non-standard pallet sizes, uneven weight distribution, and fragile or hazardous cargo. Operators apply modified techniques and request assistance when loads exceed safe limits.

Lesson 3 • Lifting, Lowering, and Travelling with Loads

Teaches travel height, load tilt, and speed reduction requirements when carrying loads. Operators apply these rules to prevent tip-overs and dropped load incidents.

Lesson 4 • Fork Positioning and Pallet Entry

Covers fork spread adjustment, approach angle, and full pallet entry depth requirements. Correct entry prevents pallet damage and load instability during transport.

Lesson 1 • Pedestrian and Traffic Management

Covers designated travel lanes, pedestrian right-of-way rules, and intersection protocols. Pedestrian collisions are the most frequent serious injury in powered industrial truck operations.

Lesson 2 • Floor Surface and Environmental Hazards

Identifies wet floors, floor gaps, ramps, and debris as traction and stability risks. Operators adjust speed and technique based on surface conditions encountered.

Lesson 3 • Hazardous Material Awareness

Introduces recognition of hazardous cargo labels, spill response basics, and restricted zone rules. Operators know when to stop and escalate rather than proceed independently.

Lesson 4 • Dock and Ramp Operations

Teaches dock plate use, trailer chocking, and safe ramp gradient limits for loaded travel. Dock operations represent a disproportionate share of serious pallet jack incidents.

Lesson 1 • Tip-Over Response Procedures

Teaches the correct brace-and-hold technique for rider units and step-away response for walkies. Operators rehearse instinctive reactions to reduce injury severity during tip-overs.

Lesson 2 • Incident and Near-Miss Reporting

Explains what qualifies as a reportable event and how to complete accurate incident reports. Near-miss reporting is emphasised as a leading indicator of future serious incidents.

Lesson 3 • Immediate Post-Incident Actions

Covers securing the scene, shutting down equipment, and providing first-aid support. Correct immediate actions prevent secondary injuries and preserve evidence for investigation.

Lesson 4 • Equipment Malfunction Protocols

Addresses brake failure, hydraulic loss, and electrical fault responses during active operation. Operators follow prioritised steps to stop safely and isolate the equipment.

Lesson 1 • High-Density Storage Navigation

Covers very narrow aisle techniques, guided aisle systems, and rack proximity awareness. Operators minimise product and rack damage while maintaining throughput in tight spaces.

Lesson 2 • Continuous Improvement Mindset

Encourages operators to identify inefficiencies, report equipment issues proactively, and participate in safety audits. Engaged operators are the primary driver of sustained operational improvement.

Lesson 3 • Productivity Metrics and Route Planning

Introduces picks-per-hour benchmarks, travel path optimisation, and battery-aware route planning. Operators balance speed targets with safety standards to meet operational goals.

Lesson 4 • Multi-Pallet and Double-Deep Handling

Teaches tandem pallet pickup, double-deep rack deposit, and load sequencing strategies. These techniques increase pick efficiency but require precise fork control and load awareness.