
OSHA Fundamentals: Managing Risk of Fire Emergencies Course
Master the OSHA fire safety standards that keep workers alive and businesses compliant. This course covers fire science, hazard identification, prevention planning, and emergency response from the ground up. Whether you manage a warehouse, a lab, or a construction site, you'll walk away with the practical tools to assess risk, build compliant programs, and lead confidently when it counts.
What you will learn:
Identify ignition sources, fuel types, and fire spread mechanisms in real workplace environments.
Interpret OSHA fire safety standards, including exit routes, prevention plans, and extinguisher requirements.
Conduct structured fire risk assessments and document findings for management and regulatory review.
Apply the hierarchy of controls to eliminate or reduce fire hazards through layered prevention strategies.
Build and implement emergency action plans, including evacuation roles, drills, and disability accommodations.
Design compliant fire safety training programs and maintain documentation that satisfies OSHA inspections.
How you study in practice OSHA Fundamentals: Managing Risk of Fire Emergencies Course
How you practice OSHA Fundamentals: Managing Risk of Fire Emergencies Course
For companies looking to train their teams
With Dedika for businesses, the course includes exercises and examples tailored to your own business and the way your company needs.
Course Content
8 Chapters • 39 LessonsDuration between 4 and 360 hours (you decide)
Chapter 1HideHide detailsSee detailsFire Science and Hazard Fundamentals
Fire Science and Hazard Fundamentals
Lesson 1 • The Fire Triangle and Tetrahedron
Covers combustion chemistry: fuel, oxygen, heat, and chain reaction. Provides the conceptual model used throughout the course to analyze fire risk.
Lesson 2 • Common Workplace Ignition Sources
Catalogs electrical, mechanical, chemical, and human ignition sources found in occupational environments. Grounds hazard identification in real workplace contexts.
Lesson 3 • Fire Behavior and Spread Mechanisms
Explains conduction, convection, and radiation as heat transfer modes. Connects spread mechanisms to building layout and occupancy fire risk.
Lesson 4 • Classes of Fire and Fuel Types
Distinguishes the five fire classes by fuel category. Enables correct extinguisher selection and suppression strategy decisions.
Chapter 2HideHide detailsSee detailsOSHA Fire Safety Regulatory Framework
OSHA Fire Safety Regulatory Framework
Lesson 1 • Employee Rights and Anti-Retaliation Protections
Explains worker rights to report hazards, refuse unsafe work, and participate in inspections. Reinforces a culture of safety reporting without fear.
Lesson 2 • Fire Safety Standards Overview
Surveys OSHA fire-related standards covering exit routes, fire prevention plans, and emergency action plans. Maps each standard to specific workplace obligations.
Lesson 3 • Inspection, Citation, and Penalty Process
Describes how OSHA inspections are triggered, conducted, and resolved. Prepares students to respond appropriately during and after an inspection.
Lesson 4 • OSHA Authority and General Duty Obligations
Defines OSHA's mandate to eliminate recognized hazards and the general duty clause. Establishes the legal baseline for all fire safety compliance activities.
Lesson 5 • Recordkeeping and Reporting Requirements
Covers mandatory incident recording, fire-related injury logs, and fatality reporting timelines. Connects documentation to regulatory compliance and hazard trend analysis.
Chapter 3HideHide detailsSee detailsFire Hazard Identification and Risk Assessment
Fire Hazard Identification and Risk Assessment
Lesson 1 • Documenting and Communicating Risk Findings
Structures risk assessment reports for management review and regulatory inspection. Ensures findings drive corrective action rather than remain unaddressed.
Lesson 2 • Electrical and Mechanical Fire Hazards
Identifies wiring faults, overloaded circuits, and mechanical friction as fire precursors. Links electrical and mechanical hazard findings to corrective action.
Lesson 3 • Hazard Identification Methodologies
Introduces walkthrough inspections, job hazard analysis, and process review as identification tools. Establishes a repeatable approach to finding fire hazards.
Lesson 4 • Flammable and Combustible Material Hazards
Evaluates storage, handling, and disposal risks for flammable liquids, gases, and solids. Connects material properties to specific ignition and spread scenarios.
Lesson 5 • Risk Assessment Principles and Matrices
Applies likelihood-versus-consequence matrices to prioritize fire hazards. Translates qualitative risk levels into actionable control priorities.
Chapter 4HideHide detailsSee detailsFire Prevention Plans and Controls
Fire Prevention Plans and Controls
Lesson 1 • Flammable Material Storage and Handling Controls
Specifies approved container types, storage room design, and quantity limits for flammable materials. Reduces ignition probability through proper material management.
Lesson 2 • Hierarchy of Controls Applied to Fire
Maps elimination, substitution, engineering, administrative, and PPE controls to fire hazards. Establishes the preferred order for selecting preventive measures.
Lesson 3 • Housekeeping and Waste Management Practices
Addresses combustible waste accumulation, oily rag disposal, and clutter as fire fuel sources. Integrates daily housekeeping into the fire prevention culture.
Lesson 4 • Written Fire Prevention Plan Requirements
Details mandatory elements of a compliant fire prevention plan document. Prepares students to draft, review, and update plans for their workplaces.
Lesson 5 • Hot Work Permit Programs
Establishes permit-to-work controls for welding, cutting, and grinding operations. Prevents ignition events through pre-job hazard review and fire watch protocols.
Chapter 5HideHide detailsSee detailsFire Detection and Suppression Systems
Fire Detection and Suppression Systems
Lesson 1 • Fire Detection System Types and Functions
Compares smoke, heat, and flame detectors by operating principle and application. Connects detector selection to occupancy type and fire scenario.
Lesson 2 • System Inspection, Testing, and Maintenance
Defines required inspection frequencies, test procedures, and impairment management for fire systems. Ensures students can oversee contractor compliance and document results.
Lesson 3 • Automatic Sprinkler System Fundamentals
Explains wet-pipe, dry-pipe, and pre-action sprinkler systems and their activation logic. Connects system type selection to occupancy hazard classification.
Lesson 4 • Fire Alarm System Components and Notification
Describes initiating devices, control panels, and notification appliances in alarm systems. Ensures students can verify alarm coverage and signal paths.
Lesson 5 • Portable Fire Extinguisher Selection and Use
Covers extinguisher ratings, agent types, and the PASS technique. Prepares employees to make correct extinguisher choices and use them safely.
Chapter 6HideHide detailsSee detailsEmergency Action Plans and Evacuation Procedures
Emergency Action Plans and Evacuation Procedures
Lesson 1 • Evacuation Drills and Plan Maintenance
Establishes drill frequency, scenario design, and post-drill critique processes. Converts written plans into practiced, reliable employee behaviors.
Lesson 2 • Evacuation of Persons with Disabilities
Addresses areas of refuge, personal emergency evacuation plans, and buddy systems. Ensures no occupant is left behind due to mobility or sensory limitations.
Lesson 3 • Exit Route Design and Compliance
Specifies exit route width, height, marking, and lighting requirements. Connects physical exit design to occupant load and travel distance limits.
Lesson 4 • Evacuation Roles and Warden Training
Defines floor warden, assembly point coordinator, and accountability officer duties. Ensures trained personnel can guide orderly evacuation without management direction.
Lesson 5 • Emergency Action Plan Mandatory Elements
Lists required EAP components including alarm procedures, evacuation routes, and designated roles. Provides the structural template for a compliant written plan.
Chapter 7HideHide detailsSee detailsEmployee Fire Safety Training Programs
Employee Fire Safety Training Programs
Lesson 1 • Delivering and Evaluating Training
Covers facilitation techniques, knowledge checks, and skill demonstrations for fire training delivery. Ensures trainers can assess whether learning objectives were achieved.
Lesson 2 • Designing Effective Fire Safety Instruction
Guides development of learning objectives, content sequencing, and instructional methods for fire topics. Produces training that builds measurable competency.
Lesson 3 • Adult Learning Principles for Safety Training
Applies adult learning theory to fire safety instruction design. Increases knowledge retention and skill transfer through relevance and practice.
Lesson 4 • Regulatory Training Requirements by Role
Maps OSHA-required fire training topics to employee categories including general staff and designated responders. Prevents compliance gaps from role-based training omissions.
Lesson 5 • Training Documentation and Recordkeeping
Specifies training record content, retention periods, and access requirements. Protects the organization during inspections and post-incident investigations.
Chapter 8HideHide detailsSee detailsIncident Command and Post-Incident Management
Incident Command and Post-Incident Management
Lesson 1 • Coordinating with Emergency Services
Covers pre-incident planning with fire departments, information transfer at handoff, and site access facilitation. Reduces response delays through advance coordination.
Lesson 2 • Business Continuity During Fire Emergencies
Addresses temporary operations, critical asset protection, and communication during active incidents. Limits operational disruption while maintaining life safety priority.
Lesson 3 • Post-Incident Investigation and Corrective Action
Guides root cause analysis, evidence preservation, and corrective action development after fire events. Converts incidents into systemic improvements that prevent recurrence.
Lesson 4 • Incident Command System Structure
Explains ICS command, operations, logistics, finance, and planning sections. Establishes the organizational model used to manage fire emergencies of any scale.
Lesson 5 • Initial Response and Size-Up Procedures
Defines the size-up process for assessing fire scope, life safety, and resource needs. Enables the first arriving supervisor to make sound initial decisions.
Your valid completion certificate
This course is for you:
Safety coordinators: ready to formalize fire prevention responsibilities at work.
Facilities managers: overseeing buildings where fire compliance gaps create liability.
HR professionals: adding occupational safety oversight to their existing responsibilities.
Construction supervisors: managing high-risk sites with active hot work and combustibles.
Career changers: entering the EHS field and needing a credible regulatory foundation.
Small business owners: personally responsible for keeping their workforce safe and compliant.
What our students say
Your classes are perfect. I purchased the one-year package and finally have the opportunity to follow various topics of interest without needing to switch platforms... I thank you for everything you do, I've already recommended you to other people...

I like how the lessons are straight to the point and how I can switch chapters and skip content I don't need.

I like the content and the presentation style and video transcription, which speeds up the process!

The platform is fast, simple to use. The diversity of content and complementary videos really help with learning.

Top trainings
FAQ
Who is Dedika?
Is the certificate valid in United States?
Are the courses free?
What is the course workload?
What are the courses like?
How do the courses work?
What is the duration of the courses?
What is the cost or price of the courses?
What is an EAD or online course and how does it work?
PDF Course




















