Digital Music Production Course

Lesson 1 • How Digital Audio Works

Covers sample rate, bit depth, and the analogue-to-digital conversion chain. Establishes the technical baseline needed for every subsequent production decision.

Lesson 2 • Setting Up Your DAW

Guides students through installing and configuring a digital audio workstation for low-latency, professional-quality work. Directly enables hands-on practice in all later chapters.

Lesson 3 • The Signal Chain Explained

Traces audio from source to speaker, covering gain staging and routing concepts. Prevents common noise and distortion problems throughout the course.

Lesson 4 • Music Theory Essentials for Producers

Introduces scales, chords, rhythm, and tempo as they apply directly to production tasks. Provides the harmonic and rhythmic vocabulary used throughout the course.

Lesson 1 • Velocity, Humanisation, and Groove

Covers velocity editing, timing nudges, and groove quantisation to make programmed beats feel natural. Directly addresses the mechanical stiffness common in beginner productions.

Lesson 2 • Drum Machine and Sampler Basics

Introduces step sequencers, pad controllers, and sample-based drum instruments. Establishes the tools used for all beat-programming exercises in this chapter.

Lesson 3 • Building Full Drum Arrangements

Applies pattern programming to full song structures with fills, transitions, and variations. Prepares students for arrangement work in later chapters.

Lesson 4 • Programming Kick, Snare, and Hi-Hat Patterns

Teaches foundational rhythmic patterns across major genres including hip-hop, house, and trap. Connects rhythmic theory from Chapter 1 to practical beat construction.

Lesson 1 • Modulation Routing and Automation

Covers modulation matrices, macro controls, and DAW automation for dynamic sound movement. Connects synthesis to the arrangement and mixing workflow introduced later.

Lesson 2 • Sampling and Resampling Techniques

Teaches chopping, pitching, and resampling audio as a creative synthesis method. Bridges hardware-style sampling with modern DAW-based sound design.

Lesson 3 • Subtractive Synthesis Fundamentals

Breaks down oscillators, filters, envelopes, and LFOs as the building blocks of subtractive synthesis. Provides the conceptual model applied to all other synthesis types.

Lesson 4 • Designing Bass and Lead Sounds

Applies subtractive synthesis to create genre-ready bass lines and lead melodies. Reinforces oscillator and filter concepts through practical sound-building exercises.

Lesson 1 • Song Structure and Arrangement

Covers intro, verse, chorus, bridge, and outro construction for commercial and electronic music formats. Provides the structural framework for all final project work.

Lesson 2 • MIDI Fundamentals and Workflow

Explains MIDI messages, channels, and controller data as the language connecting instruments to the DAW. Establishes the technical foundation for all MIDI-based production tasks.

Lesson 3 • Bass Lines and Counter-Melodies

Teaches bass line construction that locks with the kick drum and supports harmonic movement. Integrates drum programming from Chapter 2 with harmonic content.

Lesson 4 • Writing Chord Progressions and Melodies

Applies music theory from Chapter 1 to compose emotionally effective chord progressions and melodic hooks. Directly feeds the arrangement and sound design skills developed earlier.

Lesson 1 • Audio Editing and Comping

Teaches cutting, crossfading, time-stretching, and pitch correction to assemble perfect composite takes. Prepares audio tracks for the mixing stage.

Lesson 2 • Tuning and Timing Correction

Applies pitch and timing tools to correct and enhance recorded performances without artefacts. Ensures recordings meet the technical standard required before mixing.

Lesson 3 • Microphone Techniques and Placement

Covers microphone types, polar patterns, and placement strategies for vocals, guitars, and room sound. Directly determines the quality of all recorded audio in the course.

Lesson 4 • Vocal Recording Best Practices

Addresses breath control, performance coaching, and technical setup for capturing professional vocal takes. Vocal quality directly impacts the final mix and master.

Lesson 1 • Reverb and Delay in the Mix

Introduces send-and-return routing for reverb and delay to create depth and space without muddying the mix. Builds the spatial dimension of the mix before advanced techniques.

Lesson 2 • Panning and Stereo Placement

Applies panning, stereo widening, and mono compatibility checks to build a wide, focused stereo image. Ensures the mix translates on mono playback systems.

Lesson 3 • Compression and Dynamic Control

Teaches threshold, ratio, attack, and release settings to control dynamics and add punch. Connects to the gain staging foundation and prepares tracks for spatial processing.

Lesson 4 • Equalisation Techniques

Covers subtractive and additive EQ, high-pass filtering, and frequency carving to separate elements in the mix. Directly addresses muddiness and frequency masking.

Lesson 1 • Saturation, Distortion, and Harmonic Colour

Applies tape saturation, tube drive, and bitcrushing to add harmonic richness and analogue character. Expands the tonal toolkit beyond EQ and compression.

Lesson 2 • Sidechain Compression and Ducking

Uses sidechain routing to create rhythmic pumping effects and transparent ducking between competing elements. Builds on the compression skills from Chapter 6.

Lesson 3 • Modulation Effects for Depth

Covers chorus, flanger, phaser, and tremolo as tools for movement and stereo width. Complements the spatial processing introduced in Chapter 6.

Lesson 4 • Vocal Processing Chains

Builds complete vocal processing chains including EQ, compression, de-essing, and reverb for polished lead and backing vocals. Integrates recording and mixing skills.

Lesson 1 • Mastering EQ and Tonal Balance

Applies broad, surgical EQ moves to correct tonal imbalances and match the frequency profile of reference tracks. Builds on the EQ skills from Chapter 6.

Lesson 2 • Mastering Concepts and Goals

Defines mastering as the final quality-control and loudness-optimisation stage distinct from mixing. Sets the mindset and technical targets for all mastering work.

Lesson 3 • Multiband Compression and Limiting

Uses multiband compression to control dynamic imbalances across frequency bands before final limiting. Ensures consistent loudness without pumping or distortion.

Lesson 4 • Export, Metadata, and Delivery

Covers file format selection, loudness normalisation, metadata embedding, and delivery specifications for major distribution platforms. Completes the production-to-release pipeline.