Car Polishing Course

Lesson 1 • Automotive Paint System Overview

Covers the layers of modern automotive paint from substrate to clear coat. Provides the structural context needed to understand how polishing affects each layer.

Lesson 2 • Workplace Safety and Environmental Controls

Covers PPE requirements, chemical handling, and ventilation standards for a polishing environment. Safe practices protect operators and comply with workplace health regulations.

Lesson 3 • Common Paint Defects Identification

Teaches recognition of swirl marks, scratches, oxidation, and water spots. Accurate defect identification drives correct product and technique selection.

Lesson 4 • Polishing Science and Abrasion Principles

Explains how abrasives remove material and level paint surfaces. Students gain the theoretical basis for selecting correct cut levels.

Lesson 1 • Dual-Action and Forced-Rotation Polishers

Explains orbital motion types and their effect on paint correction aggressiveness. Students learn when to choose DA or forced-rotation over rotary machines.

Lesson 2 • Polishing Pad Types and Materials

Covers foam, microfiber, and wool pad construction and their cutting profiles. Pad selection directly determines the aggressiveness and finish quality achieved.

Lesson 3 • Equipment Maintenance and Storage

Teaches cleaning, inspection, and storage routines for polishers and pads. Maintained equipment performs consistently and extends service life.

Lesson 4 • Rotary Polisher Operation

Covers the mechanics, speed settings, and handling of rotary polishers. Rotary machines deliver the highest cut and require precise technique to avoid damage.

Lesson 1 • Panel Masking and Protection

Covers taping trim, rubber seals, and plastic components before polishing. Masking prevents product staining and machine contact damage on non-paint surfaces.

Lesson 2 • Clay Bar Decontamination

Explains clay bar and clay mitt use to remove bonded surface contaminants. Claying produces a smooth surface that allows polishing pads to work evenly.

Lesson 3 • Two-Bucket Wash Method

Teaches the two-bucket wash technique to prevent wash-induced swirl marks. Proper washing is the first step in any professional paint correction process.

Lesson 4 • Surface Inspection Under Lighting

Teaches systematic inspection using LED, halogen, and natural light sources. Thorough inspection creates a defect map that guides the correction plan.

Lesson 1 • Selecting the Correct Combination

Teaches the pad-and-product matrix for single-stage correction decisions. Matching cut level to defect severity prevents over-correction and paint thinning.

Lesson 2 • Machine Speed and Pressure Control

Covers optimal speed ranges and applied pressure for effective material removal. Consistent pressure and speed produce uniform correction across each panel.

Lesson 3 • Residue Removal and Inspection

Covers correct microfiber towel technique for removing compound residue. Post-correction inspection confirms defect removal and identifies areas needing re-work.

Lesson 4 • Overlapping Pass Technique

Teaches the 50% overlapping pass pattern for complete and even surface coverage. Consistent overlap eliminates missed areas and high-cut zones.

Lesson 1 • Stage Two: Polishing and Refining

Teaches medium-polish application to remove stage-one haze and refine clarity. This stage transitions the surface from corrected to near-finished condition.

Lesson 2 • Stage Three: Finishing and Jeweling

Covers fine finishing polish and soft pad use to maximise gloss and clarity. Jeweling produces the mirror-like finish required for show-quality results.

Lesson 3 • Stage One: Heavy Cutting

Covers aggressive compound and cutting pad use to remove deep defects. Stage one maximises material removal while monitoring paint thickness throughout.

Lesson 4 • When Multi-Stage Correction Is Required

Defines defect types and severity levels that demand multi-stage approaches. Understanding escalation criteria prevents under-correction and unnecessary paint removal.

Lesson 1 • Ceramic Coating Fundamentals

Introduces ceramic coating chemistry, surface requirements, and application basics. Ceramic coatings deliver semi-permanent protection and require precise application conditions.

Lesson 2 • Paint Protection Film Basics

Covers PPF material types, coverage zones, and the role of film alongside polishing. Students understand when to recommend PPF as a complement to paint correction.

Lesson 3 • IPA Panel Wipe-Down Procedure

Teaches isopropyl alcohol wipe-down to remove oils and fillers before protection. A clean, oil-free surface is essential for proper bonding of any protective product.

Lesson 4 • Paint Sealant Application

Teaches synthetic sealant application for longer-lasting paint protection than wax. Sealants bond chemically to clear coat and resist UV, water, and contaminants.

Lesson 1 • Diagnosing and Correcting Polish Failures

Covers common polishing failures including holograms, high spots, and streaking. Systematic diagnosis identifies root causes and guides effective re-correction.

Lesson 2 • Plastic Trim and Headlight Restoration

Teaches polishing techniques adapted for plastic bumpers, trim, and headlight lenses. Plastic surfaces require lower heat and specific abrasives to avoid melting or hazing.

Lesson 3 • Polishing Matte and Satin Finishes

Covers the unique requirements of matte and satin paint that prohibit standard polishing. Students learn approved cleaning and protection methods that preserve the factory texture.

Lesson 4 • Working in Challenging Conditions

Addresses temperature, humidity, and direct sunlight effects on polishing outcomes. Students learn to adapt product and technique choices to environmental variables.

Lesson 1 • Quality Inspection at Each Stage

Teaches mid-process and final inspection checkpoints using proper lighting. Stage-by-stage inspection catches errors early and maintains correction quality.

Lesson 2 • Efficient Job Timing and Workflow

Covers time estimation, task sequencing, and workspace organisation for professional efficiency. Efficient workflow increases throughput without sacrificing correction quality.

Lesson 3 • Pre-Job Vehicle Inspection and Documentation

Teaches systematic pre-job inspection and written condition documentation with photos. Documentation protects both the operator and the client and sets correction expectations.

Lesson 4 • Post-Job Delivery and Client Education

Teaches vehicle delivery procedures and client care instruction for maintaining results. Educated clients preserve correction outcomes and generate repeat business.