Beginner Sublimation Printing Course

Lesson 1 • What Is Sublimation Printing

Defines sublimation as a heat-activated dye transfer process. It establishes the foundational concept that the entire course builds upon.

Lesson 2 • How the Sublimation Process Works

Traces the full workflow from digital file to finished product. It connects each step so that students see the process as an integrated system.

Lesson 3 • Suitable Substrates and Materials

Identifies which materials accept sublimation ink and why polymer content matters. Students can evaluate any blank product for compatibility.

Lesson 1 • Heat Press Types and Selection

Compares flat, swing-away, clamshell, and specialty presses. Students match press type to the product categories they plan to produce.

Lesson 2 • Sublimation Ink and Transfer Paper

Explains ink chemistry and paper coating properties that affect output quality. Students avoid common purchasing mistakes from the start.

Lesson 3 • Calibrating and Testing Equipment

Guides students through initial printer and press calibration routines. It establishes a baseline so that later troubleshooting has a known reference point.

Lesson 4 • Sublimation Printers Overview

Covers printer types converted or purpose-built for sublimation ink. Students select the right printer tier for their production volume.

Lesson 1 • ICC Profiles and Colour Management

Explains how ICC profiles map ink output to accurate colour. Students install and apply profiles to achieve consistent results across print runs.

Lesson 2 • Understanding Colour Modes

Distinguishes RGB screen colour from CMYK print colour and their sublimation implications. Students avoid colour-shift surprises before pressing.

Lesson 3 • Ink Density and Saturation Settings

Covers how ink density settings affect vibrancy and bleed. Students dial in saturation for different substrate types without wasting ink.

Lesson 1 • Sizing and Scaling Artwork

Teaches accurate sizing relative to substrate dimensions and bleed areas. Students avoid cropped or misaligned prints on finished products.

Lesson 2 • Working with Templates and Mockups

Demonstrates using product templates to position artwork accurately. Students reduce waste by previewing placement before committing to a print.

Lesson 3 • Design Software Fundamentals

Introduces raster and vector software options used in sublimation workflows. Students choose appropriate tools based on design type and budget.

Lesson 4 • Mirroring Designs for Transfer

Explains why designs must be horizontally flipped before printing. Students apply mirroring correctly so that text and images read properly after pressing.

Lesson 1 • Printer Driver and Software Settings

Configures print driver options for sublimation output quality. Students set media type, colour management, and resolution correctly every time.

Lesson 2 • Executing a Test Print

Walks through printing a nozzle check and a small test image before full production. Students catch ink or alignment issues before wasting blanks.

Lesson 3 • Loading and Handling Transfer Paper

Covers proper paper orientation, feed direction, and coating-side identification. Students prevent jams and wasted prints from incorrect paper handling.

Lesson 1 • Pressing Specialty Items

Adapts pressing technique for mugs, hats, and curved hard substrates. Students use appropriate attachments and settings for non-flat products.

Lesson 2 • Common Pressing Defects and Fixes

Identifies ghosting, scorching, uneven colour, and blurring causes. Students diagnose and correct pressing errors before repeating them in production.

Lesson 3 • Pressing Flat Substrates

Demonstrates the full press cycle for shirts, mousepads, and flat hard panels. Students execute consistent presses and peel transfers correctly.

Lesson 4 • Preparing the Substrate for Pressing

Covers pre-pressing, lint removal, and transfer alignment techniques. Students eliminate moisture, wrinkles, and misalignment before every press cycle.

Lesson 1 • Maintaining Consistent Colour Across Runs

Covers batch consistency strategies including ink levels and paper lot management. Students deliver uniform colour across large orders and repeat productions.

Lesson 2 • Building a Troubleshooting Reference Log

Guides students in creating a personal defect-solution reference document. This log accelerates future problem-solving and supports team knowledge sharing.

Lesson 3 • Diagnosing Print-Side Defects

Traces banding, colour gaps, and ink bleed back to printer or ink causes. Students resolve print-side issues without replacing equipment unnecessarily.

Lesson 4 • Diagnosing Press-Side Defects

Links fading, ghosting, and colour inconsistency to heat press variables. Students adjust settings systematically rather than guessing at solutions.

Lesson 1 • Mapping the End-to-End Process

Creates a visual workflow map from order receipt to finished product delivery. Students see how each skill learned connects within a real production sequence.

Lesson 2 • Batching and Production Efficiency

Introduces batching strategies to reduce setup time and increase throughput. Students organise work so that the press and printer are never idle unnecessarily.

Lesson 3 • File and Asset Management

Establishes a folder structure and naming convention for design files and templates. Students retrieve assets quickly and avoid version confusion on repeat orders.

Lesson 4 • Tracking Materials and Inventory

Covers basic inventory tracking for blanks, ink, and paper to prevent production delays. Students maintain stock levels that support consistent order fulfilment.