Candle Making Course

Lesson 1 • How Candles Work

Covers combustion chemistry, the capillary action of wicks, and heat transfer in wax. Establishes the scientific basis that informs every craft decision ahead.

Lesson 2 • Wicks, Dyes, and Additives

Introduces wick materials, sizing logic, colourants, and performance additives like vybar and stearic acid. Connects component choices to finished candle quality.

Lesson 3 • Wax Types and Properties

Compares paraffin, soy, beeswax, coconut, and blended waxes by melt point, scent throw, and finish. Guides material selection for different candle styles.

Lesson 4 • Setting Up a Safe Workspace

Defines ventilation, fire safety, and ergonomic layout requirements for a candle studio. Proper setup prevents accidents and supports consistent production.

Lesson 1 • Understanding Scent Notes

Breaks down top, middle, and base notes and their evaporation rates in a burning candle. Note structure guides blending decisions for lasting, complex aromas.

Lesson 2 • Scent Load Rates by Wax

Teaches maximum fragrance load percentages for each wax type and how overloading causes seepage or fire risk. Correct ratios are calculated by weight.

Lesson 3 • Testing Cold and Hot Throw

Defines cold throw vs. hot throw and establishes a structured cure-and-burn test protocol. Objective evaluation methods replace guesswork with repeatable data.

Lesson 4 • Blending Fragrance Profiles

Applies note theory to create original scent blends using a structured formula approach. Students develop a signature blend through iterative testing.

Lesson 1 • Wick Centering and Anchoring

Teaches centering tools, adhesive tabs, and wick bars to hold wicks perfectly vertical during pouring. Centred wicks prevent tunnelling and uneven burns.

Lesson 2 • Melt and Pour Temperature Control

Establishes target melt, fragrance-add, and pour temperatures for common container waxes. Precise temperature control eliminates sinkholes and frosting.

Lesson 3 • Selecting and Preparing Containers

Covers glass, tin, ceramic, and concrete vessel selection based on heat tolerance and aesthetics. Proper cleaning and priming prevent adhesion failures.

Lesson 4 • Achieving a Smooth Top Surface

Addresses sinkholes, wet spots, and frosting through pour technique and second-pour methods. A flawless surface signals quality to customers.

Lesson 1 • Pouring and Repour Techniques

Covers initial pour depth, relief hole poking, and repour timing to compensate for wax shrinkage. Correct repour eliminates cavities and sunken tops.

Lesson 2 • Mould Types and Preparation

Surveys metal, polycarbonate, silicone, and DIY moulds and their release requirements. Proper mould prep prevents sticking and preserves surface detail.

Lesson 3 • Demoulding and Surface Finishing

Guides safe demoulding, buffing, and polishing techniques to achieve a professional surface. Post-mould finishing distinguishes handmade quality from mass-produced appearance.

Lesson 4 • Taper Candle Production

Teaches dipping and moulding methods for tapers, including wax temperature and dip interval control. Uniform diameter and straight form require disciplined repetition.

Lesson 1 • Gel Candle Fundamentals

Introduces gel wax density grades, compatible fragrance rules, and bubble-free pour methods. Gel's transparency enables decorative embeds not possible in opaque waxes.

Lesson 2 • Botanical and Decorative Additions

Evaluates dried botanicals, crystals, and wood elements for safety and aesthetic impact. Only non-flammable, properly placed decorations are approved for burn-safe candles.

Lesson 3 • Wax Melts and Tarts

Teaches high-fragrance-load wax melt formulation, clamshell moulding, and snap-bar production. Wax melts extend a candle brand into the flameless fragrance market.

Lesson 4 • Layered and Embedded Candles

Covers sequential pour timing, colour separation, and safe embed materials for layered designs. Precise temperature control prevents layer bleeding and embed fire hazards.

Lesson 1 • Dye Types and Mixing Ratios

Compares liquid dyes, dye blocks, and powder pigments for blendability and heat stability. Precise weight-based ratios ensure batch-to-batch colour consistency.

Lesson 2 • Colour Theory for Candle Makers

Applies primary, secondary, and tertiary colour relationships to wax dye mixing. Understanding undertones and saturation prevents muddy or unexpected colour results.

Lesson 3 • Surface Decoration Techniques

Teaches wax painting, mica powder dusting, and texture stamping on pillar and container candles. Surface decoration adds perceived value without altering burn performance.

Lesson 1 • Wick Troubleshooting

Diagnoses tunnelling, drowning, mushrooming, and sooting as symptoms of incorrect wick sizing. Each defect maps to a specific corrective adjustment in wick selection.

Lesson 2 • Batch Documentation and Traceability

Establishes batch record templates capturing materials, temperatures, weights, and test results. Traceability enables rapid recall and continuous formula improvement.

Lesson 3 • Burn Testing Protocol

Defines a structured multi-session burn test covering melt pool, flame height, and soot output. Systematic testing replaces subjective judgment with objective performance data.

Lesson 4 • Fragrance and Colour Defect Analysis

Identifies scent fade, discolouration, bleeding, and frosting as formulation or process errors. Root-cause analysis guides targeted formula corrections rather than trial-and-error fixes.

Lesson 1 • Selling Channels and Launch Strategy

Compares craft markets, e-commerce platforms, wholesale, and subscription models for candle sales. Choosing the right channel mix aligns with production capacity and brand goals.

Lesson 2 • Material Sourcing and Cost Control

Evaluates supplier selection, bulk purchasing thresholds, and cost-per-unit tracking. Strategic sourcing directly determines profit margin at every production scale.

Lesson 3 • Batch Production Planning

Covers production scheduling, batch size optimisation, and workflow sequencing to maximise output. Efficient batching reduces per-unit cost and minimises material waste.

Lesson 4 • Packaging and Presentation

Covers box selection, tissue wrapping, label design, and unboxing experience for retail and gifting. Packaging communicates brand value before the customer smells the candle.