Piano Tuner Training

Lesson 1 • String Physics and Harmonics

Explains frequency, tension, and inharmonicity in piano strings. Connects string physics directly to why equal temperament requires stretch tuning.

Lesson 2 • Grand vs. Upright Design Differences

Contrasts horizontal and vertical string orientation and their tuning implications. Prepares students to adapt technique across instrument types.

Lesson 3 • Piano Frame and Structural Components

Identifies cast-iron plate, rim, and keybed roles in sustaining string tension. Structural integrity directly affects tuning stability.

Lesson 1 • Historical Tuning Systems Overview

Surveys Pythagorean, meantone, and well-temperament systems before equal temperament. Historical context clarifies why equal temperament became the standard.

Lesson 2 • International Pitch Standard A440

Establishes A440 as the universal reference and explains deviations found in practice. Students learn to set and verify concert pitch before tuning.

Lesson 3 • Aural Beat Recognition Training

Develops the ear to count beats per second in intervals. This skill is the foundation of all aural tuning sequences.

Lesson 4 • Musical Intervals and Frequency Ratios

Defines octaves, fifths, fourths, thirds, and sixths as frequency ratios. Ratio understanding is prerequisite for evaluating temperament compromises.

Lesson 1 • Workplace Safety and Ergonomics

Addresses repetitive-strain risks, proper posture, and safe string-tension practices. Ergonomic habits prevent career-ending injuries.

Lesson 2 • Electronic Tuning Devices

Introduces strobe, needle, and software-based electronic tuning devices. Students learn device calibration and when ETDs complement aural tuning.

Lesson 3 • Mutes, Wedges, and Damping Tools

Explains rubber and felt mutes used to isolate individual strings during tuning. Proper muting technique is essential for accurate unison setting.

Lesson 1 • Major Third and Sixth Verification

Uses major thirds and sixths as cross-checks to confirm temperament accuracy. These intervals reveal errors invisible in fourths and fifths alone.

Lesson 2 • Completing and Testing the Octave

Finalises all twelve notes and runs a full interval sweep to verify the temperament. Students document beat rates for self-assessment.

Lesson 3 • The Fourths and Fifths Sequence

Teaches the classic ascending-fourths and descending-fifths temperament sequence. Students practise until beat rates match theoretical targets.

Lesson 1 • Rough Tuning Pass Technique

Covers rapid, approximate tuning to bring all strings near target pitch. The rough pass reduces string tension imbalance before fine tuning.

Lesson 2 • Assessing Pitch Deviation

Teaches measurement of overall pitch level before beginning work. Accurate assessment determines whether one or multiple passes are needed.

Lesson 3 • Managing String and Frame Stress

Addresses the structural risks of large pitch changes and how to mitigate them. Students learn safe incremental tension increases to protect the instrument.

Lesson 1 • Setting Unisons Accurately

Teaches the sequence for tuning two- and three-string unisons to eliminate beats. Stable unisons are the final measure of a quality tuning.

Lesson 2 • Tuning the Treble Section

Covers the high-inharmonicity treble and the technique of tuning by unison partials. Students learn to avoid false beats from worn strings.

Lesson 3 • Tuning Stability and Pin Setting

Explains how tuning pin torque and string afterlength affect stability. Students practise setting pins so tuning holds under playing conditions.

Lesson 4 • Tuning the Bass Section

Addresses wound string inharmonicity and the unique challenges of the low register. Students practise bass octave sequences from the temperament downward.

Lesson 1 • ETD Limitations and Aural Override

Identifies conditions where ETD data is unreliable and aural judgment must prevail. Students develop criteria for overriding ETD recommendations.

Lesson 2 • Generating and Editing Tuning Curves

Explains how ETD software calculates optimal stretch from inharmonicity data. Students edit curves to match client preferences or instrument condition.

Lesson 3 • Measuring Inharmonicity with an ETD

Teaches the ETD measurement sequence to capture each string's inharmonicity profile. This data drives the custom tuning curve for that specific piano.

Lesson 1 • Pre-Service Assessment Protocol

Establishes a systematic inspection routine before touching the tuning pins. Findings inform service scope, pricing, and client communication.

Lesson 2 • Scheduling and Route Efficiency

Addresses appointment scheduling, geographic routing, and time management. Efficient routing maximises daily service capacity and reduces travel cost.

Lesson 3 • Communicating Technical Findings

Teaches plain-language explanation of tuning and repair findings to non-technical clients. Clear communication builds trust and justifies service fees.

Lesson 4 • Pricing, Invoicing, and Records

Covers service pricing structures, invoice creation, and maintaining client records. Accurate records support repeat business and warranty tracking.